Eicon Networks DIVA T/A ISDN manual 25 Tab, Settings options

The DIVA Terminal Adapters Program for Windows 95/98/NT

X.25 Tab

This tab is visible only if the data protocol is set to ‘MultiLink PPP with AODI’.

As AO/DI uses the ISDN D-channel X-25 packet service to maintain an “always on” connection between you and your Service Provider, there are X.25 parameters that can be configured. These are X.25 Facilities and your X.25 Version. This information is provided by your Service Provider.

Settings options

Parameter	Description
Packet	A Packet Telephone Number identifies a node on an X.25 network. The address is a
Telephone	series of one to fifteen digits. Every X.25 node has a Packet Telephone Number.
Number	It defines the D-channel's DTE address for communication with the local packet
	handler. This parameter allows the DIVA T/A to activate the D-channel during
	initialization and give its address to the switch.
	This value is assigned by your ISDN provider at subscription time.
X.25 Version	ITU (formerly CCITT) reviews and makes international standards recommendations
	for communications protocols. X.25 is a CCITT recommendation for the interface
	between Data Terminal Equipment (DTE) and Data Circuit-Terminating Equipment
	(DCE) for packet-switched data networks (PSDNs).
	There are two X.25 CCITT recommendations available for selection, 1984 and 1988.
	This information is provided by your Service Provider and should match the X.25
	recommendation supported on the switch you are connecting to.

DIVA T/A ISDN Modem User’s Guide ◆ Page 48