Eicon Networks DIVA T/A ISDN manual VT100 Configuration Tool, At@Menu

The VT100 Configuration Tool

The VT100 Configuration Tool is included in your DIVA T/A firmware and can be used to configure your ISDN settings on any computer platform. To access the VT100 Configuration Tool, you need a VT100-compatible terminal emulation program such as Telix, HyperAccess, or Zterm.

1Start the VT100-compatible terminal emulation program. Set the parameters of your VT100 terminal emulation program using the table below as a guideline:

Terminal Emulation Type:	VT100/VT102
Local Echo:	Off
CR Translation:	CR
LF after CR:	Off

2Verify that the terminal-emulation program uses the same COM port as that assigned to the DIVA T/A.

3Enter the following command at the prompt and press Enter:

AT@MENU

The main VT100 Configuration Tool screen opens:

*	-----------------------------------------------------------------------------				*
	DIVA T/A ISDN Modem - International		Version 2.2
	Copyright © 1999 Eicon Technology Corporation
+	-------------------------------------------------------------			+---------------	+
MENU: Main menu				Choice:
				Current profile
	Open Profile:	Current profile		Profile 0
				Profile 1
	ISDN Parameters:	< press Enter >		Profile 2
	Protocol:	PPP async/sync		Factory profile
	Phone Line:	< press Enter >
	Advanced:	< press Enter >
	Powerup Profile:	Profile 0
	Save Profile:	Profile 0
	Restart Unit:	Profile 0
	Quit
<ESC> Quit
+	-----------------------------------	HELP----------------------		+---------------	+
Selects which profile to open: current, stored (0,1,2) or factory.
	-Loads the current profile.
*	-----------------------------------------------------------------------------				*

DIVA T/A ISDN Modem User’s Guide ◆ Page 73