DIVA T/A ISDN Modem User’s Guide ◆ Page 117
Analog Device Support
Three-party Conference Call
This feature lets you speak with up to two people at the same time. Once a Three-party
Conference Call is set up, you may drop a call and continue with the other caller, or you put
the one caller on hold while staying connected to the other caller.
Using Three-party Conference Call
Setting up a Three-party Conference Call:
1Dial the first number, then press R to place the call on hold.
2Dial the second number.
3Press R,3 to begin the conference call.
Drop a party while conference is active:
During the Three-party Conference Call, you can press R,1 to disconnect the last-connected
party and continue talking to the remaining party.
Splitting and reconnecting the calling parties:
During the Three-party Conference Call, you can press R,2 to place the last connected party
on hold and talk exclusively with the first-co nnected party.
At this point you can press R,1 to disconnect the current call and switch to the call on hold;
R,2 to switch between the two calls; or R,3 to re-establish the conference call (see “Call Hold”
on page106).
Note: If you hang up during a three-way conference call, all connections are dropped
immediately.