Eicon Networks DIVA T/A ISDN manual Introduction, Menu Bar Commands

The DIVA Terminal Adapters Program for Macintosh

Introduction

Launching the DIVA Terminal Adapters Program

To launch the Terminal Adapters program, double-click on the DIVA Terminal Adapters icon.

The ‘Eicon DIVA Terminal Adapters Program’ window appears as shown below.

You can launch the Configuration Tool, which allows you to edit your ISDN settings, by clicking on the ‘Profiles’ tab, choosing a profile, then clicking the ‘Configure’ button. For more information, see “Configuring a Profile using the Configuration Tool” on page 60.

Getting Help

The DIVA Terminal Adapters program offers Balloon Help. To turn it on, select ‘Show Balloons’ from the Help menu. When you point the mouse at something that has help associated with it, a small balloon will appear with information on that topic.

Menu Bar Commands

The following table describes the commands found in the menu bar.

Select	To perform this Action
File >	Saves the current device configurations back to your DIVA T/A. If you
Save Configuration	have not made any changes, this command is not available.
File >	Quits the program. You will be prompted to save your profiles to the
Quit	DIVA T/A if you have not already done so with the ‘Save Configuration’
	command.
Modem >	Edits the currently selected profile. To select a profile, click on the
Configure	‘Profile’ tab and then choose a profile from the list in the center of the
	window. You can also click the ‘Configure’ button.
Modem >	Edits the active profile. The active profile is the one selected in the
Configure Active	‘Active Profile’ area at the bottom of the ‘Profile’ window. Changes made
	to the active profile are automatically written back to the device.
Modem >	Downloads new firmware. Before downloading new firmware, use the
Download Firmware	‘Export Profiles’ command to save your current configuration to disk.
	See “Updating Firmware” on page 79 for more details.

DIVA T/A ISDN Modem User’s Guide ◆ Page 56