Windows 95/98/NT Installation and Setup

Windows NT 4.0

RAS Recommended

Before you begin installing the DIVA T/A, we suggest that the Remote Access Service (RAS), also known as Dial-Up Networking, be installed with at least one modem. Any modem will do; it is only needed to install the DIVA T/A and can later be removed.

Setup Instructions

Follow these steps to set up the DIVA T/A under Windows NT 4.0.

1Power on your PC with all cables connected (see page 7 for instructions).

2Insert the DIV AT/A CD into your computer's CD drive.

3Click ‘Start’, ‘Settings’, ‘Control Panel’, then double-click the ‘Modems’ icon. If you have previously installed a modem, the ‘Modem Properties’ window opens; click ‘Add’. If you have not previously installed a modem, go to step 4.

DIVA T/A ISDN Modem User’s Guide Page 16

Page 16
Image 16
Eicon Networks DIVA T/A ISDN manual Windows NT, RAS Recommended