Eicon Networks DIVA T/A ISDN manual Specifying Isdn Settings via the Configuration Assistant

Macintosh (System 7 or Later) Installation and Setup

Specifying ISDN Settings via the Configuration Assistant

The Configuration Assistant helps you configure your DIVA T/A ISDN Modem to work with your ISDN network connection. Later you may re-run the Assistant or make changes manually using the Configuration Tool.

1Open the ‘Eicon Technology’ folder, then the ‘DIVA Terminal Adapters’ folder.

2Double-click the ‘Eicon DIVA Terminal Adapters’ icon.

3Upon startup, the DIVA Terminal Adapters program searches for devices connected to your system. If your DIVA T/A is detected, the ‘New Device’ window appears.

4Click ‘OK’. This will start the Configuration Assistant.

If you do not want to be notified of a new device at startup, enable the ‘Don’t suggest configuration of new device at startup’ checkbox before clicking ‘OK’.

If you do not want to configure the DIV AT/A at this time, click ‘Cancel’.

DIVA T/A ISDN Modem User’s Guide ◆ Page 28