Updating Firmware
Updating the DIVA T/A INF file
Procedure for Windows 3.x, Windows for Workgroups 3.11, and Windows NT 3.51
This section only applies if you are using RAS.
To update the DIVA T/A INF file:
1Open any text editor.
2Open the file MODEM.INF found in the Windows\System directory for Windows 3.x or Windows\System32\RAS directory for Windows NT 3.51, and remove all sections relating to the DIVA T/A ISDN Modem.
3Open the updated file WFWNTEI2.INF.
4Copy the contents of WFWNTEI2.INF and append it to the end of the MODEM.INF file; save the appended MODEM.INF file, and exit your text editor.
5(Windows NT only). From the RAS setup, remove the ‘Eicon DIVA T/A ISDN Modem’ and then restore it. Refer to RAS online help for information on removing and adding modems.
