Eicon Networks DIVA T/A ISDN manual Enabling DIVAT/A Call Waiting using the Configuration Tool

Analog Device Support

To disconnect from the current call and accept the incoming call:

1Press R and wait for a dial-tone.

2Press 1.

To place the first call on hold and answer the incoming call:

1Press R and wait for a dial-tone.

2Press 2.

Once the call is on hold, you can toggle back and forth between the two parties by pressing R,2. To disconnect from the current call and reconnect to the held call, pres sR,1.

Enabling DIVAT/A Call Waiting using the Configuration Tool

The DIVA T/A Call Waiting setting is also available through the DIVA Terminal Adapter Program, which you can run by double-clicking the T/A icon in the lower right corner of the Windows taskbar. Once launched, double-click the DIVA T/A icon, then click one of the Phone Port tabs. The ‘Call Waiting’ setting is available in the ‘Options’ area, as shown below.

Click here to enable or disable

DIVAT/A Call Waiting

(If you are using a Macintosh, see the command AT*Wn in the Reference Guide.)

Notes on Call Waiting Behaviour

The following situations apply if you are on the phone and a second call comes in:

If...Then...

•ISDN Call Waiting is available through your ISDN line

•You will hear a Call Waiting alert.

•Call switching is handled by your ISDN service provider.

•	ISDN Call Waiting is not available	•	The second call receives a busy signal.
•	The DIVA T/A’s Call Waiting is disabled	•	You do not receive a Call Waiting alert.

DIVA T/A ISDN Modem User’s Guide ◆ Page 108