The DIVA Terminal Adapters Program for Macintosh
Location Tab
The ‘Location’ tab contains information on your ISDN switch type and telephone numbers.
Use the table below as a guideline for setting these parameters.
Parameter | Description |
Switch Type | Specifies the ISDN switch type used by your ISDN service provider. |
| Your choices are Europe (EuroISDN), Australia (MicroLink), Australia (OnRamp), |
| Japan |
|
|
Use 2 | Activates the ‘2nd Number’ tab. Use the second number tab if your ISDN |
Numbers | provider assigns two numbers. |
|
|
Telephone | Specifies your Directory Numbers. If your line supports Multiple Subscriber |
Number | Numbers (MSNs), the DIVA T/A handles incoming calls differently, depending |
(1st Number/ | on what you enter in the Telephone Number fields. |
2nd Number) | • If you do not specify a number in either the ‘1st Number’ or ‘2nd Number’ |
| fields, all ports (PHONE 1, PHONE 2, and ISDN) answer both directory |
| numbers. |
| • If you specify a number in the ‘1st Number’ field but leave the ‘2nd Number’ |
| field empty, all ports (PHONE 1, PHONE 2, and ISDN) answer only calls to the |
| specified number. |
| • If you specify one number in the ‘1st Number’ field, and a different number in |
| the ‘2nd Number’ field, PHONE 1 answers only calls to the first number; |
| PHONE 2 answers only calls to the second number; and the ISDN port answer |
| calls to either the 1st or 2nd number. |
|
|
DTE Address | This field only applies if AO/DI supported by your ISDN service provider and if |
| ‘Enable Always On / Dynamic ISDN’ is enabled (see page 62). |
| An X.25 DTE Address identifies a node on an X.25 network. The address is a |
| series of one to fifteen digits. Every X.25 node has an X.25 address. |
| Your service provider assigns this value at subscription time. |
|
|
DIVA T/A ISDN Modem User’s Guide ◆ Page 63
