DIVA T/A ISDN Modem User’s Guide ◆ Page 31
Setup for Other Operating Systems
The DIVAT/A does not include native installation applications for Windows 3.x, Windows for
Workgroups 3.11, DOS, OS/2, Macintosh (prior to System 7), and other operating systems.
However, it is still possible to configure the DIVAT/A using the VT100 Configuration Tool. A
VT100-compatible terminal emulation program is required.
Windows 3.x and Windows for Workgroups 3.11
If you are going to use the DIVAT/A with RAS for WFW, RAS must already be installed with at
least one modem. Any modem will do; it is only needed to properly install the DIVAT/A and
will later be removed.
If you are using RAS, follow the steps below. If you do not want to use RAS, see “The VT100
Configuration Tool” on page 73.
1Connect the cables to your DIVAT/A as outlined on page 7.
2Power on your PC.
3Insert the DIVAT/A CD into your computer's CD drive.
4With any text editor, open the file MODEM.INF found in the Windows\System directory.
5Open the file WFWNTEI2.INF (found at the root of the DIVAT/A CD).
6Copy the contents of WFWNTEI2.INF to the end of the MODEM.INF file; save the
appended MODEM.INF file, and exit your text editor.
7Start the RAS setup program.
8From the RAS setup, change the unused modem to the DIVAT/A. Ref er to the RAS online
help to change modems.
9To set your ISDN parameters, follow the instructions provided in “The VT100
Configuration Tool” on page73.
DOS, OS/2, Macintosh (prior to System 7), and Others
1Connect the cables to your DIVAT/A as outlined on page 7.
2Power on your PC.
3To set your ISDN parameters, follow the instructions provided in “The VT100
Configuration Tool” on page73.