Eicon Networks DIVA T/A ISDN manual Windows

DIVA T/A ISDN Modem User’s Guide

Windows 95/98/NT Installation and Setup

Windows 98

Warning!

It is very important to follow the steps, exactly as described below, to install the DIVA T/A software. The setup file for ISDN modems (mdmisdn.inf), supplied on the Microsoft Windows 98 CD, contains incorrect information about the DIV AT/A ISDN Modem (incorrectly referred to as ‘Eicon T-A External’). Using this setup file will cause the DIV AT/A to operate incorrectly. DO NOT use the ‘Add New Hardware’ applet (found in ‘Control Panel’) to install the DIVA T/A.

Setup Instructions

Follow these steps to set up the DIVA T/A under Windows 98.

1Power on your PC with all cables connected (see page 7 for instructions).

2Windows 98 detects the DIV AT/A and the ‘New Hardware Found’ window appears, followed by the ‘Add New Hardware Wizard’ window.

3Insert the DIV AT/A CD into your computer's CD drive.

4From the ‘Add New Hardware Wizard’ window, click ‘Next’.

5Select the ‘Search for the best driver for your device’ option and click ‘Next’.

◆Page 14