Using the DIVAT/A
DOS
1Ensure that the ShivaRemote connection software (or similar) is installed on your computer.
2Enter the following command:
C:\SHIVA\CONNECT
3From the ‘Tools’ menu, choose ‘Port Setup’ and select the COM port.
4Select ‘Modems’. Enter ‘Eicon DIVA T/A ISDN Modem’ in the ‘Modem Name’ field and set the speed to 115200 bps (or 230400 if your COM port supports it), then select ‘OK’.
5Click ‘Network’.
6Enable ‘IP’ and/or ‘IPX’ (as required), then select ‘OK’.