Connecting the Cables to the DIVAT/A

After Connecting the Cables

After connecting the power and the ISDN cable to the DIVA T/A, wait at least 10 seconds for the DIVA T/A to initialize and then check the ‘D’ and ‘Link’ LEDs. If they are both glowing continuously, then your DIVA T/A is operational from a previous configuration. If not, you will have to provide information on your ISDN setup using the DIVA Terminal Adapters software, which you will install next. See below.

What’s Next?

The installation procedure you need to follow depends on the operating system you are using. Go to the page corresponding to your platform and continue.

Windows 95/98/NT Installation and Setup

9

Macintosh (System 7 or Later) Installation and Setup

25

Setup for Other Operating Systems

31

DIVA T/A ISDN Modem User’s Guide Page 8

Page 8
Image 8
Eicon Networks DIVA T/A ISDN manual After Connecting the Cables, What’s Next?