DIVA T/A ISDN Modem User’s Guide ◆ Page 116
Analog Device Support
Call Redirection between Analog PortsIf two analog devices are connected to your DIVAT/A, you can transfer a call from the device
on one port to the device on the other. For example, you can transfer a call from the phone
on the PHONE1 port to the phone on the PHON E2 port. (This is also referred to as “internal
transfer.”) To receive the transferred call, the second device must be on hook and not ringing.
This feature requires Call Hold to be supported by you r ISDN service.
Using Call Redirection between Analog Ports
To transfer a call to the other analog port:
1Press R. The current call is put on hold (you will hear a dial tone).
2Press ‘*’, then hang up. The second analog device rings.
3When the second analog device answers, the transfer is complete.
To transfer the current call with a call on hold:
1Press R. The current call is put on hold (you will hear the dial tone)
2Press *. The last call connected is transferred.
3When the second device answers, the transfer is complete.
Other options:
•To cancel the transfer, lift the receiver of the initiating device and press *R. The call is
then re-established with the first device.
•If the second device can not accept the redirected call (it is busy or ringing), the device
initiating the transfer will ring. The call can then be answered and communication
re-established.
•If the second device does not answer within 30 seconds (90 seconds in D enmark and
Sweden), the call is cleared. Note that communication charges may apply while the
transferred call is ringing (see Call Hold).