Analog Device Support
Call Hold
Call Hold lets you suspend a voice conversation with a person (place them on hold), and make a call to a second number. You can then toggle back and forth between the first and second caller. When you are finished talking to the second person, you can hang up that call, and continue the call with the first person.
Using Call Hold
To place a call on hold:
1With a voice call active, press R.
2The person you are speaking with is placed on hold, and you hear a dial tone.
3Dial the number of the second party.
To switch between held calls
1Press R, then wait for a dial tone.
2Press 2.
To disconnect the current cal land continue the other:
1Press R, then wait for a
2Press 1.
Note: If you hang up while a call is on hold, the connection remains active and full communication charges may apply. To indicate that a call is still on hold, the phone will ring for 30 seconds (90 seconds in Denmark and Sweden).
