IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this appliance.

IMPORTANT SAFETY NOTICE

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances.

Gas appliances can cause minor exposure to four of these substances, namely benzene, carbon monoxide, formaldehyde and soot, caused primarily by the incomplete combustion of natural gas or LP fuels. Properly adjusted burners, indicated by a bluish rather than a yellow flame, will minimize incomplete combustion. Exposure to these substances can be minimized further by venting with an open window or using a ventilation fan or hood.

When You Get Your Oven

Have the installer show you the location of the oven gas cut-off valve and how to shut it off if necessary.

Have your oven installed and properly grounded by a qualified installer, in accordance with the Installation Instructions. Any adjustment and service should be performed only by qualified gas oven installers or service technicians.

Do not attempt to repair or replace any part of your oven unless it is specifically recommended in this guide. All other servicing should be referred to a qualified technician.

Be sure all packaging materials are removed from the oven before operating it, to prevent fire or smoke damage should the packaging material ignite.

Be sure the oven is securely installed in a cabinet that is firmly attached to the house structure. Never allow anyone to climb, sit, stand or hang on the oven door.

Be sure your oven is correctly adjusted by a qualified service technician or installer for the type of gas (Natural or LP) that is to be used. Your oven can be converted for use on either type of gas. See the Installation Instructions.

WARNING: These adjustments must be made by a qualified service technician in accordance with the manufacturer’s instructions and all codes and requirements of the authority having jurisdiction. Failure to follow these instructions could result in serious injury or property damage. The qualified agency performing this work assumes responsibility for the conversion.

Using Your Oven

Do not leave children alone or unattended where an oven is hot or in operation. They could be seriously burned.

Do not allow anyone to climb, stand or hang on the door or the broiler drawer. They could damage the oven.

CAUTION: ITEMS OF INTEREST TO CHILDREN SHOULD NOT BE STORED IN CABINETS ABOVE AN OVEN—CHILDREN CLIMBING ON THE OVEN TO REACH ITEMS COULD BE SERIOUSLY INJURED.

Teach children not to play with the controls or any other part of the oven.

Never leave the oven door open when you are not watching the oven.

Always keep combustible wall coverings, curtains or drapes a safe distance from your oven.

Never wear loose fitting or hanging garments while using the appliance. Be careful when reaching for items stored in cabinets over the oven. Flammable material could be ignited if brought in contact with flame or hot oven surfaces and may cause severe burns.

For your safety, never use your appliance for warming or heating the room.

• Do not use water on grease fires. Smother fire or flame or use a multi- purpose dry chemical or foam-type fire extinguisher.

Flame in the oven can be smothered completely by closing the oven door and turning the oven off or by using a multi-purpose dry chemical or foam-type fire extinguisher.

(continued next page)

Important Safety Instructions

3

Page 3
Image 3
GE JGRS14 warranty Important Safety Instructions, When You Get Your Oven, Using Your Oven

JGRS14 specifications

The GE JGRS14 (General Electric Joint Tactical Ground Station - Ground Radar Sensor 14) is a groundbreaking piece of technology designed for advanced surveillance and reconnaissance missions. It showcases GE's commitment to pushing the boundaries of ground-based radar capabilities, making it a critical asset for military and defense operations.

One of the main features of the JGRS14 is its high resolution imaging radar system, which allows for exceptional target detection at various ranges. This capability is crucial for identifying both stationary and moving targets in complex environments, ensuring operational effectiveness even in challenging weather conditions. The radar system uses advanced signal processing techniques to enhance image clarity, enabling users to achieve more accurate situational awareness and decision-making.

The JGRS14 employs a modular and scalable architecture, meaning it can be adapted to different operational needs while maintaining optimal performance. This flexibility is essential for military units that may require varying levels of surveillance capabilities depending on their mission profiles. Additionally, the system is designed for easy integration with existing military command and control networks, enabling seamless data sharing and improved collaboration among units.

A significant technological advancement in the JGRS14 is its use of artificial intelligence (AI) and machine learning algorithms. These technologies allow the system to process large volumes of data in real time, automatically identifying potential threats and providing actionable intelligence to operators. By reducing the time needed for human analysis, the JGRS14 enhances response times and operational effectiveness.

Another characteristic of the JGRS14 is its rugged design, built to withstand harsh operational environments. This durability ensures that the system remains functional during extreme conditions—whether in deserts, jungles, or cold climates. The compact and lightweight nature of the radar system also allows for easy transport and deployment, making it a valuable tool for rapid response teams.

In summary, the GE JGRS14 demonstrates cutting-edge features and technologies that significantly advance ground surveillance capabilities. With its high-resolution radar, modular design, AI integration, and robust construction, the JGRS14 is positioned to play a critical role in modern military operations, enhancing situational awareness and ensuring mission success in dynamic environments. It exemplifies the future of military radar systems, bridging the gap between technology and operational needs.