GE JGRS14 Questions?, Use This Problem Solver, Care and Cleaning Minor Adjustments Problem Solver

	QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM	POSSIBLE CAUSE
“F–AND A NUMBER	• This is a function error code. Press CLEAR/OFF. Allow the oven to cool one
OR LETTER” FLASH	hour. Place the oven back into operation.
IN THE DISPLAY	• Disconnect all power to the oven for 5 minutes and then reconnect power. If the
	failure code repeats, call for service.
CONTROL SIGNALS	• This is reminding you to press BAKE and then enter a temperature.
AFTER ENTERING	• This is reminding you to enter a bake temperature after having pressed BAKE.
COOKING TIME OR
DELAY START TIME
DISPLAY GOES BLANK	• The circuit breaker in your house has been tripped, or a fuse has been blown.
DISPLAY FLASHES	• Power failure. Reset the clock.
UNABLE TO GET THE	• BAKE and BROIL HI/LO must be pressed at the same time and held for
DISPLAY TO SHOW “SF”	2 seconds.
CLOCK AND TIMER	• Check for power outage.
DO NOT WORK
OVEN LIGHT DOES	• The light bulb is loose or defective. Tighten or replace.
NOT WORK	• The pad operating the oven light is broken. Call for service.
FOOD DOES NOT	• The oven controls are not properly set. See the Broiling section.
BROIL PROPERLY	• Improper shelf position being used.
	• Food is being cooked on a hot pan.
	• Cookware is not suited for broiling.
	• The oven door and/or the broiler compartment door not closed.
	• Aluminum foil used on the broiler pan grid has not been fitted properly
	and slit as recommended.
FOOD DOES NOT	• The oven controls are not properly set. See the Baking or Roasting section.
ROAST OR BAKE	• Shelf position is not correct.
PROPERLY
	• Incorrect cookware or cookware of improper size is being used.
	• Oven thermostat needs adjustment. See the Adjust the Oven Thermostat—
	Do It Yourself section.
	(continued next page)

25

Care and Cleaning

Minor Adjustments

Problem Solver