Eicon Networks DIVA T/A ISDN manual Using the DIVAT/A

Using the DIVAT/A

•The " symbol can be used with all other ATD commands, for example: ATDX8323000&8323001&"2

ATD%123&8323001&"2

Note: If your ISDN implementation requires two numbers and BACP/BOD is enabled (on both your DIVA T/A and the remote ISDN device), you have the option of entering only one number. BACP will try to discover the second number and connect to it. If you know the two numbers, however, it is recommended that you enter both.

Note for Windows 95/98: If you use ‘~’ or ‘&’ to separate the phone numbers, deselect the ‘Use Country and area code’ parameter on the Properties tab of Dial-Up Networking. Manually enter the Country Code, Area Code, and PBX Prefix (if required) for both numbers.

If both B-channels connect to the same number, it is not necessary to enter it twice.

Contact your Internet Service Provider (ISP) if you are not sure whether you need one or two remote numbers.

DIVA T/A ISDN Modem User’s Guide ◆ Page 87