Installation Requirements

To install the DIVA T/A, you will require the following:

Item	Description
DIVA T/A Package	• DIVA T/A ISDN Modem
	• DIVA T/A software (CD)
	• ISDN cable (RJ-45)
	• Serial cable (RS-232)
	• A/C Adapter
	• Phone Adapter (RJ11) (where required)
	• Terminating Resistor (if required - see page 129)
	• DIVA T/A QuickStart Guide
	• DIVA T/A Release Notes

Desktop or Notebook	DIVA T/A can be attached to any desktop or notebook computer.

Remote Access	Supplied as part of operating platform or by Internet Service Provider (ISP).
Client Software

ISDN Basic Rate Line	Must be installed by your telephone company.

Terminal Emulation	If you are using an operating system other than Windows 95/98/NT or
Program	Macintosh (System 7 or later), you will need a VT100-compatible
	terminal-emulation program (such as Telix or HyperTerminal) in order to
	configure the DIVA T/A.

Internet Access	To establish an ISDN connection to the Internet, you will require the
(Optional)	following:
	• ISP that provides ISDN Basic Rate Interface service
	• PPP and TCP/IP communications protocols for accessing your Internet
	subscription (e.g. Windows 95/98/NT Dial-Up Networking)
	• TCP/IP clients (Web browser, FTP, Telnet)

Operating System	• Microsoft® Windows® 95, Windows 98, or Windows NT® (3.51/4.0)
	• Windows 3.x, DOS, or OS/2
	• Macintosh

COM Port	IBM-compatible computers:
	• UART 16650 (230.4 kbps) recommended for maximum throughput
	• UART 16550

Macintosh computers

•Serial port capable of 230.4 kbps transfer recommended (found on most PowerMacintosh and AV Macintosh computers).

DIVA T/A ISDN Modem User’s Guide ◆ Page 6