
Problem
The appliance does not operate.
The grill, burners, ovens and timer do not work.
The grill, burners, ovens and timer do not work.
The grill, burners, ovens and timer do not work.
Only main oven does not work.
There is no spark when lighting the gas.
The flame is blow out immediately af- ter ignition.
The gas ring burns unevenly.
The oven does not heat up.
The oven does not heat up.
The oven does not cook evenly.
The oven lamp does not operate.
The display shows “12.00” and "LED".
Steam and condensation settle on the food and in the oven cavity.
The appliance makes noises or pop- ping sounds.
Possible cause
The appliance is too hot.
There is no electrical supply.
There is no electrical supply.
There is no gas supply.
Time is not set.
Burner cap and crown are placed un- even.
Thermocouple is not heated suffi- cient.
Burner crown is blocked with food residue.
The oven is not switched on.
The necessary settings are not set.
The oven lamp is defective.
A power cut.
You left the dish in the oven for too long.
Remedy
Cool down the appliance for some hours
Make sure that the unit is connected and the electrical supply is switched on.
Examine the house electrical installa- tion fuse.
Examine the house gas supply, use other gas appliance (Central heating or gas fires).
Set the time
Make sure that the burner cap and crown are in correct positions.
After lightning the flame, keep the knob pushed for approximately 5 seconds.
Make sure that the injector is not blocked and the burner crown is clear of food particles or cleaning fluids. Dry them with a cloth and clean stub- born marks away with a dry nylon brush (for example an old tooth- brush).
Switch on the oven.
Control the settings.
Check that the appliance is correctly installed and levelled, and that you use the recommended temperatures and shelf positions.
Replace the oven lamp.
Reset the clock.
Do not leave the dishes in the oven for longer than
When the gas is drawn through the burner, it can compress as they heat up. Some metal parts of the appli- ance expand and contract when they heat up or cool down. The noises are normal.
18