EXTERNAL RECORDING
Manual recording
Manual recording from an external source
1Make sure the CDR(W) is absolutely free of scratches and dust particles.
2Press repeatedly DIGITAL / ANALOG AUX to select the input for the external source you want to record from. yAUX Digital is displayed if the digital input is
selected.
yAUX Analog is displayed if the analogue input is selected.
3Press REC TYPE on the set to enter the recording menu.
4Rotate JOG CONTROL to select the type of recording. yAUX Manual?: for manual start of recording
5Press YES to confirm your selection. yWait is displayed.
yRecord?, AUX and the remaining recording time of the CDR(W) are displayed.
6Start playback on the external source in order to set the optimal recording level on the CD recorder (see “REC LEVEL key”).
7Stop playback on the external source.
8Go to the beginning of the desired track.
9Press YES on the set and simultaneously start playback on the external source.
yThe CD recorder starts to record and RECORDING IN PROGRESS is shown. The remaining recording time of the CDR(W) is displayed.
Note: If Check Input is flashing, check the digital connection.
10 Press STOP & on the set to stop recording. yUpdate is displayed and
DO NOT FORGET TO FINALIZE!
Finalizing a CDR(W) disc is a simple procedure, necessary to:
–play a recorded CDR on a standard CD player or
–play a recorded CDRW on a CDRW compatible CD player and CD recorder.
Automatic track increment
In recording mode tracks will be incremented automatically such that the track numbers are positioned on the same position as the original.
•To switch the automatic track increment function on, press as often as necessary TRACK INCR. on the remote control during stop when CDR is selected.
yAuto Tr ON is displayed and the function is switched on. Track increments are now automatically detected from digital source material. In analogue source material a silence of 2.7 seconds or more is detected as a track increment.
•To switch the automatic track increment function off, press as often as necessary TRACK INCR. on the remote control during stop when CDR is selected.
yAuto Tr OFF is displayed and the function is switched off. Track numbers can now be incremented manually by pressing TRACK INCR. on the remote control during recording. The minimum track length is 4 seconds.
Notes: – Track numbers cannot be changed after recording.
–The automatic track increment only works with consumer sources with a digital output signal according to the IEC 958 (consumer part) audio standard. DAT, DVD and DCC do not deliver this signal.
English
21