Set time and date
1In standby mode, press and hold
MENU/INFO/SET TIME/ 
for 2 seconds.
»»The unit beeps once.
»»[24H] starts to blink.
2Press TUNING +/- 
/ 
to select the
12/24 hour format, then press OK/ 
to confirm.
»»The hour digits start to blink.
3Repeat steps 2 to set the hour, minute, day, month, and year.
»»After confirmation of the year setting, the unit beeps once again.
Tip
•• In 12 hour format,
•• in 24 hour format,
Turn on
•Press 
.
»»The unit switches to the last selected source.
Switch to standby
•Press 
again to switch the unit to standby mode.
»»The time and date (if set) appear on the display panel.
E n g l i s h
EN 9