Heat Controller EKTH, EKTC manual Recognize this Symbol AS a Safety Precaution

Page 3

Contents

 

Unit Features

3

General Information

5

Installation Instructions

6

Wiring

8

Operating Instructions

9

Obtaining Service

16

Normal Operating Sounds and Conditions

17

Configuration Settings

17

RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.

IMPORTANT NOTE TO THE OWNER

This equipment is to be serviced by professionally trained personnel only. If this equipment is improperly installed, adjusted or altered by an unqualified person, a safety hazard may result.

IMPORTANT NOTE TO THE SERVICER

Read this manual and familiarize yourself with the specific items which must be adhered to before attempting to service this unit. The precautions listed in this Installation Manual are intended as supplemental to existing practices. However, if there is a direct conflict between existing practices and the content of this manual, the precautions listed here take precedence.

Your warranty certificate is also supplied with the unit. Read the warranty carefully and note what is covered. Keep the warranty certificate in a safe place, so you can find it, if necessary.

Before using this manual, check the serial plate for proper model identification.

THE INSTALLATION AND SERVICING OF THIS EQUIPMENT MUST BE PERFORMED BY QUALIFIED,

EXPERIENCED TECHNICIANS ONLY.

Due to policy of continual product improvement, the right is reserved to change

specifications and design without notice.

2

Image 3
Contents EKTC/EKTH Package Terminal AIR CONDITIONER/HEAT Pump Recognize this Symbol AS a Safety Precaution Control Panel Chassis Front Unit FeaturesLcdi power Cord Touch PadEnergy Management System Features Transportation Damage Unit AccessoriesSleeve Stiffener and Rear Closure Panel Removal Installation InstructionsFront Mounting Screw Chassis Installation ViewProper Sleeve Tilt Cabinet Front Removal ViewWiring Ptac Wire Harness KIT PWHK01CHeaterless Units User Controls Power Cord RequirementsOperating Instructions Operating VoltageMaximum Wire Length for Front Desk Switch Front Desk Switch Wiring SchematicControl Board User Inputs Discharge Grille Orientation Options Low Voltage Wires RoutingVent Door Lever Positions Vent Control LeverRemote Control Inputs Discharge Air Flow Grille RemovalRemote Thermostat Wiring Schematic for Straight Cool Unit Wiring Schematic for Remote Heat PumpMaximum Wire Length for Remote Control Connection Vent Left Side Unit Maintenance and CleaningMonthly Maintenance and Cleaning Intake Filter RemovalCabinet Front Yearly Maintenance and CleaningNormal Operating Sounds and Conditions Obtaining ServiceTo exit configuration mode Configuration SettingsActive Failures Diagnostic Maintenance & Status ReportDiagnostic Status Report Mode Operating TemperaturesDiagnostic Codes 12/06

EKTC, EKTH specifications

The Heat Controller EKTH and EKTC models are advanced heating solutions designed to provide energy-efficient climate control for residential and commercial spaces. These heat pumps combine sophisticated technology with user-friendly features to create a comfortable environment regardless of the outside temperature.

One of the standout features of both the EKTH and EKTC units is their inverter technology. This technology allows the compressor to operate at variable speeds, adjusting its output according to the current heating requirements. As a result, these systems provide consistent heating while consuming less energy compared to traditional fixed-speed units. The inverter technology not only enhances efficiency but also minimizes noise levels, making these heat controllers suitable for quiet environments.

Another significant characteristic of the EKTH and EKTC models is their all-weather performance. These heat pumps are engineered to perform effectively in a wide range of temperatures, ensuring reliable heating even in extremely cold conditions. With advanced defrost technology, these units can operate efficiently without freezing, maintaining optimal performance year-round.

User convenience is also a priority with the EKTH and EKTC systems. Both models feature intuitive digital controls that enable users to set their desired temperature comfortably. Additionally, many versions include Wi-Fi connectivity, allowing for remote access and control through a smartphone app. This feature is ideal for individuals seeking to monitor or adjust their heating systems while away from home.

Energy efficiency is a key aspect of the EKTH and EKTC heat controllers. They are designed with high Seasonal Energy Efficiency Ratios (SEER) and Heating Seasonal Performance Factors (HSPF), which indicate their effectiveness in converting energy into heated air. Energy Star certification is often achieved by these models, making them attractive options for energy-conscious consumers looking to reduce their carbon footprint.

With a compact design, the EKTH and EKTC units can be easily integrated into various settings without taking up much space, allowing for flexible installation options. The sleek aesthetic also ensures that they blend seamlessly with interior decor.

In summary, the Heat Controller EKTH and EKTC models represent a cutting-edge solution to heating needs. They combine inverter technology, all-weather performance, user-friendly features, and high energy efficiency to provide reliable and comfortable heating solutions for any environment. Whether for a home or a commercial space, these heat pumps deliver quality and convenience in climate control.