Philips CDR778 manual Preparing for autostart recording, Start autostart recording

RECORDING

English

Autostart recording from external CD player

CD-SYNC

OPEN/CLOSE	PLAY/PAUSE	STOP	RECORDING	FINALIZE	ERASE
						EXT	SOURCE
		TYPE		RECORD
									CDR
					PROG	SHUFFLE		DISPLAY	SCROLL	REPEAT	DJ MODE

•If, however, you start the source during a track, CD-SYNC recording starts at the beginning of the next track or after 2.7 seconds of silence in analogue recordings.

•To check the remaining recording time on the CDR(W), press DISPLAY. (This can also be done during recording)

•The EASY JOG/ENTER key can be used to adjust the recording level.

•The recorder stops automatically.

The CD-SYNC feature enables you to make fast and easy recordings of a CD. Track increments are automatically detected from the source material. Track increments cannot be added manually. In analogue source material a silence of

2.7seconds or more is automatically detected as a track increment.

Preparing for autostart recording

1 Make sure the disc is absolutely free of scratches and dust particles.

2 Press EXT(ernal) SOURCE repeatedly until (depending on the digital connection used):

➜DIGITAL I, OPTICAL I or ANALOG lights up and DIGITAL 1, OPTICAL or ANALOG appears on the display.

2 To stop recording manually, press STOP on the CD recorder.

➜UPDATE lights up and SYNC and go out.

•If STOP 9 was pressed within 3 seconds after pressing PLAY, no recording will take place.

•To interrupt recording, press PAUSE on the CD recorder.

➜ starts to flash. (Autostart recording is disabled.) To resume, press RECORDING-RECORD on the CD recorder.

After recording the display will show UPDATE for several seconds.

Note:

-Recordings from DAT, DCC or analogue sources will only stop after 20 seconds silence.

-Auto track is always active.

REM REC	TIME TRACK	TOTAL REM	TRACK TIME	STEP	Important:
					If you want to play the recorded CDR disc on any
SYNC MANUAL		RECORD			regular CD player, it must first be finalised. See
				PROG	finalising discs.
DIGITAL I	CD	CHANGER	CD	SHUFFLE ALL
OPTICAL I	RW		RW	REPEAT
ANALOG				SCAN TRACK

3 With the CD recorder stopped, press RECORDING-TYPE four times:

if you wish to record a complete disc or program.

➜ and SYNC start to flash and the display shows REC EXT DISCand WAIT followed by the track number, the total remaining time and START SOURCE.

REM	REC	TIME TRACK	TOTAL REM	TRACK	TIME			STEP
SYNC MANUAL			RECORD			PROG
DIGITAL I		CD	CHANGER		CD	SHUFFLE		ALL
OPTICAL I		RW			RW	REPEAT
ANALOG						SCAN	TRACK

•If input label (DIGITAL I) flashes, the digital connection is incorrect.

Start autostart recording

1 To start recording, press PLAY on the selected source.

➜The CD recorder automatically starts to record and lights continuously. The track number and track time appear on the display.

Finalised CDRW discs play only on CDRW compatible CD players.

For recording from CD changers always use REC EXT DISC.

20