Philips CDR778 manual Installation, English Analogue connections CD recorder & CD player

Page 13

INSTALLATION

English

Analogue connections CD recorder & CD player

This connection must be made for playback on the CD recorder deck as well as the CD player deck (cable 2).

Cable 1 is only required if you want to make recordings from an external analogue source.

Use the audio cables supplied. Connect the red plugs to the R sockets, and the white plugs to the L sockets.

1 For recording, connect cable 1 between the ANALOG IN- sockets on the CD recorder and the CDR LINE- or TAPE OUT- sockets of an amplifier.

Note: For recording directly from a CD player, the analogue input of the CD recorder should be connected to the analogue output of the CD player.

2 For playback, connect cable 2 between the ANALOG OUT- sockets on the CD recorder and the input sockets of an amplifier e.g. TAPE IN, CDR or AUX.

Analogue connections CD player deck

This connection is only required if you want to playback on the CD player deck separately from the CD recorder deck. This will be the case in DJ-mode.

1 For separate playback on the CD player deck, connect a third cable 3 (not supplied) between the ANALOG OUT sockets of the CD recorder and the input sockets of an amplifier e.g. CD, or AUX.

(Connect the red plugs to the R sockets, and the white plugs to the L socket.)

Note:

-Never use the PHONO input.

-Your CD recorder/player is equipped with a digital coaxial output for the CD player deck. This output can be used for digital playback.

Note: Never use the PHONO input.

12

Image 13

Contents CDR778 For Australia only Philips Product WarrantyCassette Recorders, CD Recordable, DVD Players Audio Systems, and Portable AudioContents For Customer Use Laser110 MexicoTable of Contents General Information Technical dataAbout this manual GeneralGeneral Information and Discs AccessoriesDiscs for recording Discs for playbackControls on the front Controls and ConnectionsCD recorder CD player Display indications Connections at the back EnglishEnglish Display messages DisplayMenu messages See Menu mode Connections general English English Analogue connections CD recorder & CD player InstallationAnalogue connections CD player deck Use the digital coaxial cable supplied InstallationSetup recommendations Power supplyInserting batteries in the remote control Press Power ON/OFF CD recorder will switched onRemote control commands Remote ControlInserting discs Number/alphabet keys 0Remarks about recording RecordingPreparing for high speed recording During high speed recording the sound is not audibleDisplay first shows the selection Start high speed recordingPreparing for Listen mode recording Listen mode recording from internal CD playerStart Listen mode recording Press RECORDING-RECORDPreparing for manual recording Manual recording from external CD playerTrack numbers cannot be changed after recording Start manual recordingStart autostart recording Preparing for autostart recordingUnfinalising Cdrw discs Finalising CDR & Cdrw discsAuto finalising Manual finalisingTo erase the entire disc English Erasing Cdrw discsTo erase one or more tracks from the end Playing Play a 2-disc changer Changer modeSearch English Selecting a trackShuffle random order play Repeat CD, track or programRemarks about programming ProgrammingProgramming for playback Clearing a programRemarks about Menu mode Menu ModeGeneral operation of Menu Erasing text / text erase Text input / text editReviewing CD Text in memory / memory view Memory View CD NAuto Track OFF Auto track increment / auto trackFixing Problems