Scanner Options, Maintenance and Troubleshooting
3.Insert the pins on the right side of the imprinter unit into the holes on the scanner. Angle the imprinter down into the scanner until the pins on the left side line up with the slots in the scanner. Gently press down on the imprinter unit until it clicks in place.
4.Connect the cable to the connection port in the scanner.
5.Close the
Installing a Post-Imprinter
1.Turn off the scanner.
2.Open the
3.Connect the cable to the port in the scanner.
Be sure to properly align the rib on the connector with the slot in the connection port.
User’s Guide
