Emergency Power Off, Maintenance Information | Xerox 4799 instruction

Safety

WARNING: This equipment must be connected to a protective earth circuit.

This equipment is supplied with a plug that has a protective earth pin. This plug will only fit into an earthed electrical outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace the outlet.

Disconnect Device

The power cable is the disconnect device for this equipment. It is attached to the back of the machine as a plug- in device. To remove all electrical power from the equipment, disconnect the power cable from the electrical outlet.

Emergency Power Off

If any of the following conditions occur, turn off the machine immediately and disconnect the power cable(s) from the electrical outlet(s).

•The equipment emits unusual odors or makes unusual noises.

•The power cable is damaged or frayed.

•A wall panel circuit breaker, fuse, or other safety device has been tripped.

•Liquid is spilled into the machine.

•The machine is exposed to water.

•Any part of the machine is damaged.

Maintenance Information

1.Any operator product maintenance procedures will be described in the user documentation supplied with the product.

2.Do not carry out any maintenance on this product which is not described in the customer documentation.

3.Do not use aerosol cleaners. The use of cleaners that are not approved may cause poor performance of the equipment, and could cause a dangerous condition.

4.Use supplies and cleaning materials only as directed in this manual.

5.Do not remove covers or guards that are fastened with screws. There are no parts behind these covers that you can maintain or service.

6.Do not perform any maintenance procedures unless you have been trained to do them by an authorized local dealer or unless a procedure is specifically described in the user manuals.

Xerox® DocuMate® 4799	1-3
User’s Guide

Image 11

Xerox 4799 manual Emergency Power Off, Maintenance Information, Disconnect Device

Contents

Xerox DocuMate Restricted Rights Legend Table of Contents Scanning and Configuring OneTouch Scanning from Twain and WIA Hardware Properties and Interface Behavior Index Table of Contents Xerox DocuMate 4799 User’s Guide Do These Safety IntroductionOperational Safety Information Do Not Do These Electrical InformationElectrical Supply Disconnect Device Emergency Power OffMaintenance Information USA & Canada Europe Product Safety CertificationEnvironmental Health and Safety Contacts Contact Information Pentium 4 PC or AMD equivalent with What’s in the BoxSystem Requirements Following printed documentation is provided in the box DocumentationVGA or Svga Monitor Xerox DocuMate 4799 Scanner Page Unpack the Scanner Scanner Setup Install the Double Feed Prevention roller Page Connect the Scanner Power Cord Before You Begin Installation4 Install the Software and Connect the Scanner Click Install now Installing the Scanner Driver Connect the USB Cable and Turn on the Power Installing the User Utility Installing Visioneer OneTouch Software About the Software Installing Additional Applications View the User Guides To register your scanner Register Your Scanner Preparing Documents for Scanning Loading Documents to Scan Documents to Avoid Scanning Supported Document Types Select the Paper Feeding Options Unsupported Document Types Scanning from the Automatic Document Feeder ADF Select the Paper Path Scanning Interfaces Loading Documents to Scan Default OneTouch Settings Scanning Configuring OneTouch To scan from the OneTouch Button panel Features of the OneTouch Button PanelScan from the OneTouch Button Panel Changing the Button Settings Your scanned Selecting Options for OneTouch Destination Categories Page Technical Note Scan ConfigurationsCreate a new configuration Edit or delete a configuration Scan Settings Tab Settings Tab Scanning and Configuring OneTouch Select Manual feed mode Redaction Settings Tab Advanced Settings TabPage File Formats Create Single Image Files Image Formats To select a Jpeg file size Page To select a file type for the text format Text Formats Canceling a Configure Before Scan Configure Before ScanTo Scan Using Configure Before Scan Open Scanned Documents Transfer to Storage Setting the Folder and Options from OneTouch Storage location Setting the Folder from WindowsOpen storage folder when scan is complete Storage layout Scanning to Multiple Folders Setting Up Multiple Folders for Transfer to Storage Click the Storage Options tab Xerox DocuMate User’s Guide Scan to multiple storage folders Burn to CD-ROM Xerox DocuMate User’s Guide Printer or Fax PaperPort Window PaperPort tab Xerox DocuMate User’s Guide Scan to the current PaperPort folder SharePointSelect the destination folder for Scanned Documents Page SharePoint Link Log Viewer FTP Transfer Page FTP Link Log Viewer Smtp Page Smtp Link Log Viewer Email Applications Email Properties Text Editors Text Documents Properties Adding Text Editor Applications to OneTouch Html Creating an Html Web Page from Your Scanned Documents Still Image Client Windows Vista, 7 and 8-Hardware and Sound Open the Scanners and Cameras group Image Editors Image Documents Properties Adding Image Editor Applications to OneTouch Page Page Send to Application Page Technical note Scanning to Multiple Destinations Page Scanning with Job Separation Page Skip blank originals To scan with OCR Scanning with Optical Character Recognition OCR Text Formats Page To select OCR options available from OneTouch Selecting OneTouch OmniPage OCR Options OCR Tab Scanning and Configuring OneTouch To create a personal dictionary Creating Your Own Dictionaries Add New User Dictionary window opens To edit a user dictionary Editing User Dictionaries Scanning and Configuring OneTouch Output Format Options Format TabInput Format Options OneTouch with Visioneer Acuity Technology Acuity Settings Xerox DocuMate 103 User’s Guide Hardware Properties Driver Settings Device SettingsPage Choosing Twain or WIA Accessing the Scanner Interface Scanning To use the preview window Using the Preview WindowLocked Scanning Interface Page Page Creating custom scan regions Scan RegionsPage Xerox DocuMate 4799 User’s Guide Move, Resize, or Delete Regions Move, Resize, or Delete a Blocked Region Reordering Regions Clear All Regions Document Source Configuration Available color modes are Basic OptionsAdvanced Options To set the scanner options individually for each side Sides identical Summary Presets To delete a preset To save a new presetTo modify an existing preset To rename a preset Exporting Presets Importing a Preset Page Document Settings Main Panel Options Disabled Options in this Section Document Size ResolutionChoosing resolution values Some resolution settings for typically scanned items are Custom document sizes To scan with manual feed modeLong Document Manual Feed Flip Back Side Straighten ImageRotate Image Merge Two Sides Height threshold Advanced Panel OptionsSkip Blank Originals Compress transfers Clean Up EdgesAutomatic Image Cropping Compression Options Compression Select Enable user compression and Remember compressionQuality Subsampling Detect Double Feeds Adjusting the sensitivity levelScanner Model Panel Options Patch Code Action Detect Stapled DocumentsSkew Detection Document Handling File Separation Action Control Sheet Action Imprinter Panel Options Page Image Enhancements Disabled Options in this Section Choosing brightness values Brightness Choosing contrast values ContrastColor image brightness examples Black background scanners Color image contrast examples Color image gamma examples GammaInvert Image Choosing gamma values Mirror Image Threshold and Dynamic threshold Error diffusion, Bayer, and Halftone patternBit Depth Reduction Fill Margin Holes Color Dropout Color Processing Panel Options Automatic Color Detection Options Perform Color Correction Moiré Reduction DespeckleImage Emphasis Remove Background Smooth Background Black Level Initialize White Level From DocumentWhite Level Reordering the Modules Driver ConfigurationModule Configuration Color correction Scanner ConfigurationPower adjustments Scanner maintenance To open the scanner hardware properties Hardware Properties and Interface Behavior Scanner Details Firmware UpdatePower Settings Color Correction Counters WIA Driver GeneralTwain Driver Scanning from Twain and WIA Xerox DocuMate 4799 User’s Guide Scanning from Isis Scanning from Isis Xerox DocuMate 4799 User’s Guide Changing the Background Color Scanner Options Maintenance Troubleshooting Replacing the Rollers Replacing the Paper Feed and Separation Rollers Page Replacing the Double Feed Prevention Roller Page Installing a Pre-Imprinter Installing an Imprinter Installing a Post-Imprinter Installing an Ink Cartridge User Utility Adjusting the Printing Position Click on All Programs Main Screen OptionsPage Error Code Message Cause Resolution Scanner Error Codes Refer to Cleaning the Inside of the Scanner To prepare for shading adjustment Setting Sleep ModeBuzzer Setting Shading Adjustment To complete a shading adjustment Scanner Options, Maintenance and Troubleshooting Restoring the Default Shading Adjustment Cleaning the Outside of the Scanner Preparation Cleaning the Inside of the ScannerSafety Precautions Cleaning the ADF Rollers Cleaning the Scanner Glass and Background Plates Reset the Roller Count in the User Utility Cleaning the Paper Sensors Cleaning the ADF Sensors Clearing Paper Jams TroubleshootingProblem The scanner won’t scan. What’s wrong? Xerox DocuMate 185 User’s Guide Xerox DocuMate User’s Guide Uninstalling the scanner driver Uninstalling Your Scanner Uninstalling Visioneer Acuity Xerox DocuMate 4799 Specifications Xerox DocuMate 4799 Scanner Parts List European Union Basic RegulationsUnited States FCC Regulations Turkey RoHS Regulation Copy RegulationsOther Regulations United States Canada Regulatory Information Other Countries Professional/Business Environment Product Recycling & DisposalUSA & Canada European Union RoHS and Weee Compliance Energy Program Compliance Energy Star for the USA Index JPG Multiple folders, 6-53Scanner Use MRC, 6-93user dictionary