Scanning from TWAIN and WIA
•Launch Xerox User Utility—the Xerox User Utility helps you monitor the scanner status and maintenance information. This button will be disabled if the Xerox User Utility is not installed. You can install the User Utility from the installation disc or download it from the support page for your scanner at www.xeroxscanners.com.
Hardware Properties and Interface Behavior
You can use the scanner’s properties page to keep track of scanner maintenance, change some of the hardware options, configure the scanner interface behavior, and adjust application options that may be available for your scanner.
To open the scanner hardware properties page:
•Windows 7 and 8—from the Windows Control Panel, open Hardware and Sound and then Devices and Printers.
Right-click on the scanner and then select Scan properties from the list. Click Yes if you are prompted by the Windows User Account Control to confirm that you want make changes to the system settings.
•Windows Vista—from the Windows Control Panel, open Hardware and Sound and then Scanners and Cameras.
Click on the scanner icon then click on the Properties button. Click Yes if you are prompted by the Windows User Account Control to confirm that you want make changes to the system settings.
•Windows XP—from the Windows Control Panel when in category view, open Printers and Other Hardware and then Scanners and Cameras.
Right-click on the scanner and then select Properties from the list.
Device Settings
7-154 Xerox® DocuMate® 4799 User’s Guide
