Welcome
Pre-Imprinterdoor—Lift the output tray to access the pre-imprinter compartment.
Control panel—Scanner hardware controls.
•Hopper—Press the up or down arrow to manually adjust the height of the input tray level to match the height of the document stack.
•ADF—Changes the scanner between automatic document feeding and manual document feeding.
•Thickness—Press to change the roller position to match the paper thickness of the documents being scanned.
•Start/Stop—Press to start scanning. Pressing the button while scanning is in progress stops the scan.
ADF cover release—Pull to open the Automatic Document Feeder.
Paper guides—Guides adjust to support various document widths.
Hopper input tray—Holds the documents in the Automatic Document Feeder for scanning.
Power switch—Turns the scanner’s power on or off.
Post-Imprinterdoor—Open to access the post-imprinter compartment.
Straight path door—Lower this door to feed very thick pages straight through the scanner.
Power jack—Connects the power cord to the scanner.
Universal Serial Bus (USB) port—Connects the scanner to the computer.
2-8 | Xerox® DocuMate® 4799 |
| User’s Guide |