No Blade Cutter and No Adapter Kit

1822-I Pipe and Bolt Threading Machine

Oil Spout

Guide Post

Pipe

Connecting

Link

Oil Manifold/Lever

(Hidden)

	Workholder
	VJ-99 Pipe
	Stand
	Clamp Screw
Drive Shaft	Carriage
(Set Screws)	Saddle
Pinion Sleeve	Handwheel

Figure 20 – Operation of the No. 141 Geared Threader

No. 821 Blade Cutter and No. 822 Adapter Kit

No. 821 Blade Cutter allows the machine to groove, bevel and produce square end cuts for lined pipe and other applications. Installation requires a No. 822 Adapter Kit. The kits includes a cutter attaching arm, oil supply manifold and manifold clamp/drip tray. Reference in- structions with kit.

Installation of No. 821 Blade Cutter

1.Remove standard No. 364 Wheel Cutter from car- riage.

2.Install attaching arm and No. 821 Blade Cutter.

3.Disconnect plastic oil supply line and metal fitting from carriage.

4.Attach metal manifold supply line to carriage, install manifold and manifold clamp/drip tray.

5.Reattach plastic oil supply line to manifold.

Cut Grooving, Beveling and Cut-Off with No. 821 Blade Cutter (45 RPM)

1.Install tool bit required for desired operation.

2.Chuck pipe and place oil supply lever in the position required to direct cutting oil to flexible oil spout.

3.Place cutter over pipe and with machine in operation, tighten cutter handle until rolls engage pipe.

4.Direct oil spout to the cutting surface and slowly turn tool feed handle.

Left Hand Machine Operation

Machine is capable of left hand operation. However, user or Authorized Service Center modification is re- quired. Basically, front and rear jaws are inverted and oil lines are exchanged. In addition, a left hand die head must be pinned to the near side of the carriage through the hole in carriage rest.

NOTE! Left hand reaming requires an E-863 Reamer Cone.

CAUTION Both front and rear jaws must be in left hand mode as shown in Figure 21.

Positioning Front Jaws for Left Hand Operation

(Figure 21)

1. Run machine in the OPEN position to open jaws.

WARNING Make sure machine is unplugged from power source before performing maintenance or making any adjustments.

2.With machine OFF and unplugged, remove front and rear covers.

3.Manually rotate front jaws toward CLOSE position and remove three E-Clips holding front retainer in place. Remove retainer and spacers.

4.Remove E-Clips and washers holding front jaws on drive pins and remove front jaws.

5.Reverse front jaws and install on drive pins and rods.

Ridge Tool Company

1822-I specifications

The RIDGID 1822-I is a powerful and versatile compact pipe threading machine that is widely recognized for its reliability and innovative design. This electric threading machine is specifically engineered for both professional and DIY users, ensuring high productivity in pipe fitting and fabrication tasks.

At the core of its engineering, the RIDGID 1822-I features a robust motor that delivers high torque, allowing for efficient threading of a variety of pipe sizes up to 2 inches in diameter. This machine is equipped with a quick-release pipe clamp that securely holds the workpiece in place, providing enhanced stability and safety during operations. The user-friendly controls enable seamless operation with minimal setup time, making it an ideal choice for contractors and plumbing professionals.

One of the standout technologies integrated into the RIDGID 1822-I is its automatic shut-off feature that enhances safety while prolonging the lifespan of the machine. It also boasts an adjustable threading stop, allowing operators to maintain consistent thread lengths and ensuring precision in their work. This machine is compact in design, enabling easy portability and storage, which is especially beneficial for jobs in confined spaces or on construction sites.

The RIDGID 1822-I is constructed using durable materials and comes with a sturdy frame that minimizes vibration, significantly reducing user fatigue during extended use. Additionally, it features an integrated oil reservoir that simplifies the process of threading pipes, ensuring proper lubrication and ensuring smoother cuts.

Another characteristic that sets the RIDGID 1822-I apart is its versatility. It is compatible with various RIDGID threading dies and accessories, allowing for customization based on the specific requirements of each job. Furthermore, the machine's exceptional threading speed leads to increased efficiency, enabling users to complete projects more quickly without compromising on quality.

In conclusion, the RIDGID 1822-I is an indispensable tool for professionals looking for a reliable, efficient, and versatile pipe threading solution. Its combination of advanced features, durability, and user-friendly design make it a top choice for those in the plumbing and construction industries, as well as for DIY enthusiasts seeking a dependable machine for their pipe threading needs. With the RIDGID 1822-I, users can achieve high-quality results with ease and confidence.

RIDGID 1822-I manual No Blade Cutter and No Adapter Kit, Left Hand Machine Operation

Models: 1822-I

Drive Shaft