RIDGID 1822-I manual Description, Specifications and Standard Equipment, Accessories

1822-I Pipe and Bolt Threading Machine

Figure 1 – Locked Foot Switch

Description, Specifications and Standard Equipment

Description

The RIDGID Model 1822-I Threading Machine is an elec- tric motor-driven machine which automatically centers and chucks pipe, conduit and rod (bolt stock) and ro- tates it while threading, cutting and reaming operations are performed. Threading dies are mounted in self-opening, quick-opening die heads or semi-automatic die heads. An automatic oiling system is provided to flood the work with thread cutting oil during threading operations. Geared Threaders can also be used with the threading machine to thread larger diameter pipe.

The RIDGID Model 1822-I Threading Machine can also be used as a power source for roll grooving equipment. Designed to attach to the carriage rail of the threading machine, the roll grooving equipment forms standard roll grooves on a variety of pipe sizes and materials.

Specifications

Threading Capacity	Pipe 1/8″ through 2″
	Bolt 1/4″ through 2″
	Geared Threaders: Pipe 21/2″
	through 4″
Material Capability	Black, Galvanized, Stainless
	Steel, Cast Iron, IMC, PVC
	and Heavy Wall Conduit. Rod
	up to 30 Rockwell C
Chuck	Automatic Centering
Rear Centering Device ...	Automatic
Operating Speed	16 and 45 RPM
Motor:
Type	Induction
Horsepower	11/2 HP
Volts	120V Single Phase AC 60 HZ
Amps	15 amps
Controls	Rotary Type OPEN/OFF/-
	CLOSE Switch & ON/OFF
	Foot Switch

Pump	Gerotor-Type
Noise Level	81 DBA
Cutter	No. 364 – Roll-Type Cut-Off,
	Pipe – 1/8″ through 2″
	Bolt – 1/4″ through 1″
Reamer	No. 344 5-Flute Cone,
	Right Hand,1/8″ through 2″
Weight	210 Lbs. (95 kgs.)

Standard Equipment:

•Model No. 1822-I Threading Machine with Foot Switch

•815A Die Head Self-Opening R.H.

•1/2″ - 3/4″ NPT Alloy Dies

•1″ - 2″ NPT High Speed Dies

•1 Gallon Nu-Clear (Mineral) Oil

•364 Wheel Cutter 1/8″ - 2″ (E-1032 Cutter Wheel)

•344 Five Fluted Reamer 1/8″ - 2″

Standard Machine

Catalog	Model	Description
No.	No.	115V 25-60 Hz	RPM
20000	1822-I Automatic	115V 1/8″ - 2″ NPT	16,45
	w/815A Die Head

NOTE! NPT Dies are for NPT Die Heads only. BSPT Dies are for BSPT Die Heads only. Please use Catalog Item Nos. when ordering. High Speed Dies are recommended or use when threading 1 - 2″ pipe at 45 RPM.

Accessories

Catalog	Model
No.	No.	Description
51005	819	Nipple Chuck 1/2″ - 2″ NPT
68160	819	Nipple Chuck 1/2″ - 2″ BSPT
35867	839	Adapter Kit for No. 819 Nipple Chuck
42395	821	Blade Type Cutter
35872	822	Adapter Kit for No. 821 Blade Cutter
36620	141	4″ Geared Threader NPT
65380	141	4″ Geared Threader BSPT
35877	241	Carriage-Mount Kit for No. 141 Threader
35882	1460	Oil Pan Cover Kit
46660	E-863	L.H./R.H. Reamer Cone
34617	364	Wheel Type Cutter
50107		Conversion Kit for Plastic Coated Pipe
34217		Grooving Tool
44200	E-1050	Saran Tool for 821
43890	D471	45° Bevel, Cutoff Tool for 821
34612	344	Reamer
26707		Gear Grease (1224 & 1822)

4 Ridge Tool Company