Philips AD7000W/37 user manual Update firmware, Download the update file

Page 23

6Update firmware

Note

•• You can only update the firmware from a PC/Mac.

Download the update file

www.philips.com/support

XXXX

XXXX. zip

1 On your PC/Mac, go to www.philips.com/ support.

2 Enter the model number to find the latest firmware upgrade file available.

3 Save the upgrade file to your hard drive.

Update from the configuration page

Warning

•• Always connect your AD7000W to AC power for firmware upgrade. Never power off your AD7000W during firmware upgrade.

Note

•• To use an Internet browser other than Apple Safari on your PC/Mac, remember to go to the Wi-Fi router configuration page and write down the IP address of your AD7000W. See the user manual of your Wi-Fi router for how to find the IP addresses of devices connected to the Wi-Fi router.

1 Power on AD7000W (see ‘Turn AD7000W on’ on page 12).

»» It takes about 35 seconds for the unit to boot up. During boot-up, the WI-FI SETUP indicator on the back of the unit blinks green quickly.

»» After boot-up, you can hear a beep

and the WI-FI SETUP indicator turns to green steadily. AD7000W is connected to the last configured Wi-Fi network automatically.

2 Make sure that AD7000W and your PC/ Mac are connected to the same Wi-Fi router.

3 Open Apple Safari on your PC/Mac, then select ‘Philips_Fidelio XXX’ from the Bonjour pull-down list.

•Or open any other Internet browser on your PC/Mac, then type in the IP address of AD7000W (available on the Wi-Fi router configuration page) at the address bar.

»» The AD7000W configuration web page is displayed.

E n g l i s h

EN 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Register your product and get support at AD7000W/37 Page Get the very most from your purchase Page Contents Important Safety Instructions SafetyKnow these safety symbols FCC rules FCC & RSS compliance statementThis device may not cause harmful interference, FCC Radiation Exposure StatementEnvironmental information Disposal of your old product and batteriesReorient or relocate the receiving antenna Class II equipment symbol What else you need IntroductionWhat’s in the box List of compatible iTunes host devices for AirPlay Connect the power adaptorGet started to use AirPlay Overview of the main unitAlways follow the instructions in this chapter in sequence Connect powerPrepare Turn AD7000W onMake sure that AD7000W has been Press the WPS button on your home Wi-Fi routerConnect to your home Wi- Fi network for AirPlay Scenario 1 Connect to a WPS routerScenario 2 Connect to a non-WPS router Collect settings of your home Wi-Fi routerSwitch AD7000W to Assisted Wi-Fi Setup mode Use your Wi-Fi enabled PC/Mac Click Preferences »» The Bookmarks menu is displayed Wait until successful Wi-Fi connection on your PC/MacOpen the built-in web AD7000W 192.168.1.1 Change the internal Wi-Fi settings of AD7000WOr open the list of available Wi-Fi networks on your PC/Mac Stream from your iPod touch/iPhone/ iPad PlayStream audio from your iTunes music library to AD7000W Stream from your PC/Mac Use advanced sound settingsControl play Compatible iPod/iPhone/iPad Play from an external device»» After boot-up, you can hear a beep Update firmwareDownload the update file Save the upgrade file to your hard drive24 EN Product information SpecificationsTroubleshooting G l i s h DA7000W37UMENV2.0
Top Page Image Contents