CASSETTE RECORDER
CASSETTE PLAYBACK
1.Set the source selector to TAPE/OFF.
2. | Press STOP•OPEN 9 / to open the cassette holder. |
|
3. | Insert a recorded cassette. |
|
4. | Press PLAY 1 and playback will start. | PAUSE |
STOP- | ||
OPEN |
5.Adjust the sound using the VOLUME and DYNAMIC BASS BOOST controls.
6.For brief interruptions, press PAUSE ;. Press PAUSE ; again to 
resume playback.
7.By pressing 5 or 6,fast winding of the tape is possible in both directions.
8.To stop playback, press STOP•OPEN 9 /
™ The keys are automatically released at the end of the tape.
9.Set the source selector to TAPE/OFF position (with the cassette keys are released) to switch off the set.
SEARCH
PLAY
RECORD
SEARCH
English
CASSETTE RECORDING
General information on cassette recording
•Recording is permissible insofar as copyright or other rights of third parties are not infringed.
•This deck is not suitable for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For recording you should use NORMAL type cassettes (IEC I) on which the tabs have
not been broken.
• Check and tighten slack tape before use with a pencil, to |
| |
avoid jamming the deck machanism. |
| |
• The recording level is set automatically. Altering the VOLUME |
| |
and DYNAMIC BASS BOOST controls will not affect the | 1 | |
recording in progress. | ||
| ||
• No recording will take place during the 3 seconds, when the |
| |
leader tape passes the recorder heads. |
|
Notes :
•To prevent the accidental erasure of a recording, keep the cassette side to be safeguarded in front of you and break out the left tab. Recording on this side is no longer possible.
17