General Information, CD Play | Philips AZT9500 instruction

GENERAL INFORMATION

CD PLAY

CD player and CD handling

• Do not touch the lens A of the CD player.

• Do not expose the unit, batteries or CDs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight).

• You can clean the CD player with a soft, slightly

dampened, lint-free cloth. Do not use any cleaning

agents as they may have a corrosive effect.

• To clean the CD, wipe it in a straight line from the center toward the edge using a soft, lint-free cloth. A

cleaning agent may damage the disc! Never write on a CD or attach a sticker to it.

•The lens may cloud over when the unit is moved suddenly from cold to warm surroundings. Playing a CD is not possible then. Leave the CD player in a warm environment until the moisture has evaporated.

•Active mobile phones in the vicinity of the CD player may cause malfunctions.

•Avoid dropping the unit as this may cause damage.

Headphones HE205

• Connect the supplied headphones to the LINE OUT/p jack of the player.

Note: LINE OUT/p can also be used for connecting the	OPEN
player to your HiFi system (with a signal lead) or to
your car radio (with a cassette adapter or signal
lead). In both cases, the volume of the player must
be set to position 8.

IMPORTANT!

Hearing safety: Do not play your headphones at a high volume. Hearing experts advise that continuous use at high volume can permanently damage your hearing.

Trafﬁc safety: Do not use headphones while driving a vehicle. It may create a hazard and it is illegal in many countries. Even if your headphones are an open-air type designed to let you hear outside sounds, do not turn up the volume so high that you cannot hear what is going on around you.

Playing a CD

This CD-player can play all kinds of Audio Discs such as CD-Recordables and CD-Rewritables. Do not try to play a CD-ROM, CDi, VCD, DVD or computer CD.

1 Push the OPEN 2 slider to open the player.

2Insert an audio CD, printed side up, by pressing the CD onto the hub.

3 Close the player by pressing the lid down.

4 Press 2; to switch the player on and start playback. yThe current track number and elapsed playing

time are displayed.

• You can pause playback by pressing 2;. yThe time at which playback was paused starts

ﬂashing.

• You can continue playback by pressing 2; again.

5Press 9 to stop playback.

yThe total number of tracks and the total playing time of the CD are displayed.

6Press 9 again to switch the player off.

• To remove the CD, hold it by its edge and press the hub gently while lifting the CD.

Note: If there is no activity, the set will automatically switch off after a while to save energy.

In-car use (connections supplied or optionally available)

Only use the AY 3545 (4822 219 10033) or AY 3548 (3140 118 71890) car voltage converter (4.5 V DC, positive pole to the center pin) and the AY 3501 cassette car

Playback information

• If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded properly,

nF dISC is displayed, indicating that the CD has not been ﬁnalized. In that

adapter. Any other product may damage the set.

1Put the set on a horizontal, vibration-free and stable surface. Make sure it is in a safe place, where the set is neither a danger nor an obstacle to the driver and the passengers.

2Plug the voltage converter into the cigarette lighter jack (only for 12 V car battery, negative grounding), then connect the wired end with 4.5V DC input jack on the set.

3If necessary, clean the cigarette lighter jack to obtain a good electrical contact.

12 V DC

4,5 V DC

	case, use FINALIZE on your CD recorder to complete the recording.
• When playing a CD-Rewritable (CD-RW), please note that it takes 3–15
	seconds after pressing 2; for sound reproduction to start.
•	Playback will stop if you open the CD lid.
•	While the CD is read, 1 -:-ﬂashes in the display.

Volume and bass

Volume adjustment

• Adjust the volume by using VOL E.

OPEN

VOL

4Turn down the volume and connect the cassette adapter plug to LINE OUT/p on the set.

5Carefully insert the cassette adapter into the car radio’s cassette compartment.

6Make sure the cord does not hinder your driving.

7Set VOL E on the set to position 8. Start playback on the set and adjust the sound with the car radio controls.

•Always remove the voltage converter from the cigarette lighter jack- when the set is not in use.

Note: If your car radio has a LINE IN jack, it is better to use it for the

car radio connection instead of the cassette.adapter. Connect the signal lead to this LINE IN jack and to LINE OUT/p on the set.

Bass adjustment

•Press DBB to switch the bass enhancement on or off. y is shown if the bass enhancement is

activated.

AZT9500 specifications

The Philips AZT9500 is an innovative portable music system that seamlessly blends traditional features with modern technology, providing an exceptional audio experience for music enthusiasts. This versatile device caters to various audio formats, making it an ideal companion for both casual listeners and avid audiophiles.

One of the standout features of the AZT9500 is its robust CD player, which supports different disc formats, including regular CDs and CD-R/RW. This allows users to enjoy their favorite albums without compromising on sound quality. The player is designed to deliver clear and rich audio outputs, ensuring that every note is accurately reproduced.

In addition to its CD functionality, the AZT9500 boasts built-in Bluetooth technology, enabling users to stream music wirelessly from smartphones, tablets, or other Bluetooth-enabled devices. This feature enhances convenience, allowing for seamless access to music libraries, popular streaming services, and online radio stations. The Bluetooth connection is stable, allowing users to enjoy uninterrupted playback without the hassle of tangled wires.

The device also supports USB playback, which provides an added layer of versatility. Users can connect USB drives and enjoy their music instantly. The AZT9500 can read various audio file formats, making it easy to experience a wide range of music simply and effectively.

Portability is a key characteristic of the Philips AZT9500. Designed with a compact and lightweight form factor, it comes with a built-in rechargeable battery, allowing users to enjoy music on the go. Whether at the beach, a picnic, or simply moving from room to room, this system is adaptable to various environments.

For those who appreciate rich soundscapes, the AZT9500 features a powerful speaker system that delivers a dynamic range of audio. The overall design incorporates enhanced bass performance, further enriching the listening experience. In addition, users can customize their sound preferences through the equalizer settings, allowing for a personalized audio output.

Furthermore, Philips has integrated a user-friendly interface into the AZT9500. The easy-to-navigate buttons and clear display make selecting tracks and adjusting settings intuitive and efficient.

With its combination of portability, advanced audio technologies, and user-friendly features, the Philips AZT9500 stands out as a leading choice for anyone seeking a dependable and versatile music system. Whether at home or on the move, it ensures that quality sound is always within reach.