CD Operation
English |
IMPORTANT: |
The lens of the CD player should never be touched.
Loading a disc
This CD player plays Audio Discs including CD- Recordables and
●
1Select CD source.
2Lift the CD door on the top of the system to open the CD
compartment.
➜“OPEN” is displayed when
you open the CD compartment.
3Insert a disc with the printed side facing up and press down on PULL TO OPEN to close the CD door.
➜ “READING” is displayed as the CD player scans the contents of a disc, and then the total number of tracks is shown.
Basic playback controls
To play a disc
●Press 2; to start playback.
➜ The current track number and “PLAY” icon are displayed during disc playback.
To select a different track
●Press TUNING 4 ¢ (or 4 / ¢ on the remote control ) once or repeatedly until the desired track number appears in the display.
To find a passage within a track
1Press and hold down on TUNING 4 ¢ (or 4 / ¢ on the remote control).
➜ The disc is played at high speed and low volume.
2When you recognise the passage you want, release TUNING 4 ¢ (or 4 / ¢ on the remote control).
➜ Normal playback continues.
To interrupt playback
●Press 2; during playback.
➜The display freezes and “PLAY” icon flashes when playback is interrupted.
➜To resume, press 2; again.
To stop playback
●Press 9.
Notes: CD play will also stop when;
–the CD door is opened.
–the disc has reached the end.
–you select another source: FM, DAB, iPod or AUX.
–you select standby.
12