CD Operation
Different play modes: SHUFFLE and REPEAT
You can select and change the various play modes before or during playback.The play modes cannot be combined with
PROGRAMME.
SHUF | tracks of the entire disc are |
| played in random order. |
Rep all | repeats the entire disc/ |
| programme. |
Rep one | plays the current track |
| continuously. |
1To select Repeat play mode, press REPEAT or SHUFFL on the remote control.
●To select Shuffle play mode, press SHUFFL on the remote control.
2Press 2; to start playback if in the STOP position.
3To return to normal playback, press REPEAT or SHUFFL on the remote control until the various SHUFFLE/ REPEAT modes are no longer displayed.
●Press 9 once during playback to stop repeat/ shuffle playback.
●Press 9 again to cancel repeat/shuffle play mode.
Note:
– The SHUFFLE and REPEAT functions can be used simultaneously.
Programming track numbers
Programme in the STOP position to select and store your disc tracks in the desired sequence. If you like, store any track more than once. Up to 30 tracks can be stored in the memory.
1In the stop position, use the TUNING 4 ¢ (or 4 / ¢ on the remote control) to select your desired track number.
2Press PROG on the remote control to store. ➜ Display: PROG flashes, and 01 is displayed briefly, then the selected track number.
3Repeat steps
4To start playback of your disc programme, press 2;.
Reviewing the programme
●Stop playback and press PROG on the remote control.
Erasing the programme
You can erase the programme by:
●pressing 9 once in the STOP mode;
●pressing 9 twice during playback;
●opening the CD compartment;
➜ PROG disappears from the display.
English
13