Philips DCB146 Clock/Timer, Setting the clock, Setting the timer, Activating and deactivating

Page 21

Clock/Timer

Setting the clock

1In standby mode, press and hold CLOCK/ DISPLAY on the remote control set for 2 seconds.

2Press PROG to select 12-hour or 24-hour display.

3Press CLOCK/DISPLAY to confirm. ➜ The clock digits for the hours flash.

4Press TUNING 4 ¢ (or 4 ¢ on the remote control) to set the hours.

5Press CLOCK/DISPLAY again.

➜ The clock digits for the minutes flash.

6Press TUNING 4 ¢ (or 4 ¢ on the remote control) to set the minutes.

7Press CLOCK/DISPLAY to confirm the time.

Setting the timer

●The system can be used as an alarm clock, whereby the CD, iPod FM or DAB is switched on at a set time.The clock time needs to be set first before the timer can be used.

1In standby mode, press and hold TIMER/ SLEEP about 2 seconds on the remote control.

2Press SOURCE (or DISC/iPod/TUNER/ DAB on the remote control) to select sound source.

3Press TIMER/SLEEP to confirm your desired mode.

➜ The clock digits for the hours flash.

4Press TUNING 4 ¢ (or 4 ¢ on the remote control) to set the hours.

5Press TIMER/SLEEP again.

➜ The clock digits for the minutes flash.

6Press TUNING 4 ¢ (or 4 ¢ on the remote control) to set the minutes.

7Press TIMER/SLEEP to confirm the time. ➜ The timer is now set and activated.

Notes: .

–If CD source is selected and no disc is in the CD tray or the disc has an error,TUNER will be selected automatically.

–If iPod source is selected and no iPod player is docked,TUNER will be selected automatically.

Activating and deactivating

TIMER

●In standby mode, press briefly TIMER/SLEEP once.

➜ Display shows if activated, and disappears if deactivated.

Activating and deactivating

SLEEP

The sleep timer enables the system to switch off by itself after a set period of

time.

●During playback, press TIMER/

SLEEP on the remote control once or more. ➜ Display shows and one of the sleep time options in

sequence: 60, 45, 30,15, 00, 60... if you have selected a time.

●To deactivate, during playback press TIMER/ SLEEP on the remote control once or more until “ 00“ is shown, or press STANDBY ON 2on the system (or 2 on the remote control). ➜ disappears from the display.

English

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Register your product and get support at DAB Docking Entertainment SystemImportant notes for users in the U.K How to connect a plugMains plug Copyright in the U.KPullto Open Contents Safety Information Supplied accessoriesGeneral Information Environmental InformationListen at a moderate volume Hearing SafetyTo establish a safe volume level Listen for reasonable periods of timeRear connections PreparationsInserting batteries into the Remote Control Using the Remote Control to operate the systemControls on the system Controls on the remote controlDISPLAY/CLOCK Adjusting volume and sound Switching the system onPower-saving automatic standby CD Operation Loading a discBasic playback controls Programming track numbers Different play modes Shuffle and RepeatReviewing the programme Erasing the programmeStoring for DAB presets Switching on DAB radioDAB Radio Changing DAB stationsResetting to the factory setting Selecting a preset DAB stationUsing the Menu control Changing the DAB station informationSoftware version English Dynamic Range Control DRCTuning to preset radio stations Tuning to radio stationsFM Radio Programming radio stationsAutomatic clock setting via RDS Switching through RDS informationListening to an external source To turn on or off clock synchronizingCharging iPod battery using the dock Playing iPod using the dockIPod Playing iPodCleaning the Cabinet MaintenanceCleaning Discs Cleaning the disc lensSetting the clock Clock/TimerSetting the timer Activating and deactivatingAmplifier SpecificationsTroubleshooting English ProblemSolution Problem Solution DCB146
Top Page Image Contents