Turn on
1Press POWER.
»The unit switches to the last selected source.
Switch to standby
1Press POWER to switch the unit to standby mode.
»The backlight on the display panel is dimmed.
»The clock (if set) appears on the display panel.
Set clock
1In the standby mode, press and hold CLOCK/DISPLAY to activate the clock setting mode.
»The 12 hour or 24 hour format is displayed.
2Press PROG repeatedly to select 12 hour or 24 hour format.
3Press CLOCK/DISPLAYWRFRQÀUP
»The hour digits are displayed and begin to blink.
4Press
/
to set the hour.
5Press CLOCK/DISPLAYWRFRQÀUP
»The minute digits are displayed and begin to blink.
6Press
/
to set the minute.
7Press CLOCK/DISPLAYWRFRQÀUP
Tip
To view the clock during play, press CLOCK/ DISPLAY repeatedly until the clock is displayed.
5 Play a disc
1Press DISC to select the disc source.
2Press 
on the top panel of the unit. » The disc door opens.
3Place a disc onto the tray and press 
again.
»Ensure that the label side faces upwards.
4Play starts automatically.
If play does not start, press | / |
| to |
| |||
|
select a track and then press OK/ 
.
English
EN 11