Tuner
Tuning Range | FM: 87.5 - 108 MHz |
Tuning Grid | 50 KHz |
Sensitivity |
|
- Mono, 26 dB S/N | < 22 dBf |
Ratio |
|
Search Selectivity | < 36 dBu |
Total Harmonic |
|
Distortion | < 3% |
Signal to Noise Ratio | > 45 dBu |
Speakers
Speaker Impedance | 4ohm |
Speaker Driver | 3.5” |
Sensitivity | >82dB/m/W |
General information
AC power | 110 - |
| 50/60 Hz |
Operation Power |
|
Consumption | 20 W |
Standby Power |
|
Consumption | < 4 W |
Dimensions |
|
- Main Unit | 150 x 152 x 250 mm |
(W x H x D) |
|
- Speaker Box | 150 x 152 x 197 mm |
(W x H x D) |
|
Weight |
|
- With Packing | 5.07 kg |
- Main Unit | 2.02 kg |
- Speaker Box | 2 x 0.895 kg |
12 Troubleshooting
English
Warning
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome).When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
No power
Ensure that the AC power plug of the unit is connected properly.
Ensure that there is power at the AC outlet.
As a
No sound or poor sound
Adjust the volume.
Disconnect the headphones.
Check that the speakers are connected correctly.
Check if the stripped speaker wires are clamped.
Left and right sound outputs reversed
Check the speaker connections and location.
No response from the apparatus
Disconnect and reconnect the AC power plug, then turn on the system again.
As a
EN 17