4 Get started
Caution
Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the rear of the apparatus.Write the numbers here: Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from
KHDWVXQVKLQHRUÀUH1HYHUGLVFDUGEDWWHULHV LQÀUH
1Open the battery compartment.
2Insert 2 AAA batteries (not supplied) with correct polarity
3Close the battery compartment.
Note
If you are not going to use the remote control for a long time, remove the batteries.
Do not use old and new or different types of batteries in combination.
Batteries contain chemical substances, so they should be disposed of properly.
Auto install radio stations
When you connect the unit to the power VXSSO\IRUWKHÀUVWWLPHRUQRUDGLRVWDWLRQLV stored in this unit, Plug and Play is activated to store all available radio stations automatically.
1Connect the unit to the power supply.
»[AUTO INSTALL - PLEASE PRESS PLAY, STOP CANCEL] (auto install - press 
; to cancel, press 
) is displayed.
2Press 
on the main unit to start installation.
»[AUTO] (auto) is displayed.
»The unit automatically stores radio
VWDWLRQVZLWKVXIÀFLHQWVLJQDOVWUHQJWK
»When all the available radio stations
DUHVWRUHGWKHÀUVWSUHVHWUDGLRVWDWLRQ is broadcast automatically.
10EN