Haier AD092AMBHA, AU092AABHA Confirm drainage, Permitted length and fall of connection pipe

Page 21

INSTALLATION MANUAL FOR INDOOR UNIT

Material of connection pipe and thermal insulation

Material of connection pipe

Stiff PVC pipe VP 20mm (inside diameter)

Material of thermal insulation

Foam polyethylene pipe, thickness over 10mm

 

 

Confirm drainage

Perform test run to insure the condition of drainage, the connection part of the connection should not leak water. The confirmation must be performed even if install in winter.

!Warning

During installation, if refrigerant leakage occurs, please immediately take ventilation measure. If the refrigerant gas meet the fire, it may generate poisonous gas.

After finishing installation work, please make sure there is no refrigerant leakage. If the leaked refrigerant gas meet heater and oven, etc. fire sources, it may generate poisonous.

Material and dimension of connection pipe

Depenbing on the outdoor unit.For details,please refer to the operation manual attached with outdoor unit.

The permitted length and fall of connection pipe

Material of

Phosphorus oxidized copper seamless pipe

connection pipe

(TP2) for air conditioner

Dimension of

Gas side

12.7

connection pipe

Liquid side

6.35

Connection of refrigerant pipe

Perform with two spanners

 

When performing the connection work of flare nut, connect all the refrigerant pipe.

When connecting the connection pipe of indoor unit, must use two spanners to perform.

For the installation torque, please refer the following Table.

External diameter of

Installation torque (N.m)

Add to installation torque (N.m)

connection pipe (mm)

 

 

6.35

11.8(1.2kgf.m)

13.7(1.4kgf.m)

12.7

49.0(5.0kgf.m)

53.9(5.5kgf.m)

20

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Duct Type AIR Conditioning Table of Contents Disposal of the old air conditioner Bodily injury could result by a collapse Safety PrecautionsDo not operate the system while Machine is adaptive in following situation Applicable ambient temperature rangeParts and Functions Unit fails to start MalfunctionCooling or heating is not sufficient Cooling is not sufficientShuru Shuru Followings are not malfunctionPoints to observe Care and MaintenanceHOT KEEPis operated in the following cases When heating is startedInstallation place Installation Manual for Outdoor UnitInstallation where the area with strong winds InstallationOpen space requirement around the unit Outline piping Precautions for refrigerant pipingPiping size Piping connectionTo use vacuum pump Purging method the refrigerant is R407CInstallation Manual for Indoor Unit Preparation of indoor unit Avoid installation and use at those places listed belowPreparation for suspending the unit Figure of installation dimension unit mmInstall the hoisting screw Wood structureNew cement panel Steel structure Original cement panelSuspending of indoor unit RequirementsConfirm drainage Permitted length and fall of connection pipeConnection of refrigerant pipe Perform with two spanners Electric wiring Installation Manual for Electric WiringInstallation Manual for Wire Controller Set of the air sending of the fan motor Check and Test RUN

HDU-12HA03/M(R1)(B), HDU-09HA03/M(R1)(B), AD092AMBHA, AD122AMBHA, AU122AABHA specifications

Haier, a global leader in home appliances, has consistently pushed the boundaries of innovation and efficiency in air conditioning systems. Among its impressive lineup are the Haier HDU-09HA03/M(R1)(B), HDU-12HA03/M(R1)(B), AD092AMBHA, AU092AABHA, and AD122AMBHA models. These air conditioning units not only offer comfort but also incorporate advanced technologies and characteristics that enhance user experience.

The Haier HDU-09HA03/M(R1)(B) and HDU-12HA03/M(R1)(B) are split air conditioning systems known for their efficient cooling and heating capabilities. They feature high energy efficiency ratings thanks to their inverter technology, which adjusts the compressor's speed based on the cooling demand, resulting in lower power consumption and cost savings. The units are designed with a sleek and modern aesthetic, making them a perfect fit for various interior decors.

The AD092AMBHA and AU092AABHA models stand out for their compact design and powerful performance. These systems are equipped with smart features like Wi-Fi connectivity, allowing users to control their air conditioning remotely via a mobile app. This feature provides convenience and flexibility, enabling users to adjust settings before arriving home. Additionally, these models boast self-cleaning functions and advanced filtration systems that enhance indoor air quality by removing dust and allergens.

The AD122AMBHA model is designed for larger spaces, offering robust cooling and heating efficiency. It employs a high-performance compressor and enhanced airflow technology, ensuring consistent temperature control. Furthermore, its operation is quiet, making it an ideal choice for residential and commercial environments where noise can be a concern.

All these Haier models share a commitment to sustainability and environmental responsibility. They utilize eco-friendly refrigerants that minimize ozone depletion and are compliant with the latest environmental regulations. Moreover, the energy efficiency of these units significantly lowers carbon emissions, aligning with global efforts toward sustainability.

In summary, Haier's HDU-09HA03/M(R1)(B), HDU-12HA03/M(R1)(B), AD092AMBHA, AU092AABHA, and AD122AMBHA air conditioning models are exemplary products that combine cutting-edge technology, energy efficiency, and user convenience. With features like inverter technology, Wi-Fi control, and enhanced air quality functions, these models cater to diverse consumer needs while contributing to a more sustainable future.
Top Page Image Contents