Giant P200A-3100/5100 Specifications Model P218A-3100/5100, P218A-3100/5100 Horsepower

Page 4

Specifications

 

Model P218A-3100/5100

Volume

Up to 3.4 GPM

Discharge Pressure

Up to 2000 PSI

Inlet Pressure

Up to 90 PSI

RPM

Up to 1750 RPM

Plunger Diameter

18mm

Stroke

10.0mm

Temperature of Pumped Fluids

Up to 160oF

Inlet Ports

(2) 3/8" BSP

Discharge Ports

(2) 3/8" BSP

Shaft Rotation

Top of Pulley Towards Fluid End

Crankshaft Diameter

24mm

Key Width

8mm

Shaft Mounting

Right Side Facing Manifold

Weight

11 lbs. 11oz.

Crankcase Oil Capacity

9.5 fl.oz.

Volumetric Efficiency @ 1750 RPM

0.96

Mechanical Efficiency @ 1750 RPM

0.85

Consult the factory for special requirements that must be met if the pump is to operate beyond one or more of the limits specified above.

NOTE:

In order to drive the pump from the side opposite the present shaft extension, simply remove the valve casing from the crank- case and rotate the pumps 180 degrees to the desired position. Be certain to rotate the seal case (item #20) as well, so that the weep holes are down at the six o'clock position. Exchange the oil fill and the oil drain plugs, also. Refer to the repair instructions as necessary for the proper assembly sequence.

P218A-3100/5100 HORSEPOWER

 

 

 

REQUIREMENTS

 

 

RPM

GPM

800 PSI

1200 PSI

1500 PSI

1700 PSI

2000 PSI

1150

2.1

1.2

 

1.7

2.2

2.5

2.9

1450

2.6

1.5

 

2.2

2.7

3.1

3.6

1750

3.4

1.9

 

2.8

3.5

4.0

4.7

SPECIAL NOTE:

The theoretical gallons per revolution (gal/rev) is 0.00193.

To find specific outputs at various RPM, use the formula: GPM = 0.00193 x RPM

HORSEPOWER RATINGS:

The rating shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.

We recommend a 1.15 service

factor be specified when selecting an electric motor as the

power source.

To compute

specific pump horse power require-

ments, use the

follow-

ing formula:

 

HP = (GPM X PSI) / 1450

Image 4
Contents Contents P200A-3100/5100Installation Instructions Specifications Model P217A-3100/5100 P217A-3100/5100 HorsepowerSpecifications Model P218A-3100/5100 P218A-3100/5100 HorsepowerSpecifications Model P219A-3100/5100 P219A-3100/5100 HorsepowerP220A-3100/5100 Horsepower SpecificationsModel P220A-3100/5100 P221A-3100 Horsepower Requirements P200A-3100/5100 Series Parts List Position Item# DescriptionExploded View P200A-3100/5100 Series Repair Instruction P200A-3100/5100 Series Repair Instruction P200A-3100/5100 Series Giant Industries Limited Warranty P200A-3100/5100 Dimensions mm
Related manuals
Manual 12 pages 56.5 Kb Manual 12 pages 22.84 Kb

Triplex Ceramic Plunger Pump, P200A-3100/5100 specifications

The Giant Triplex Ceramic Plunger Pump is a cutting-edge solution designed to meet the demanding needs of high-pressure applications in various industries. Known for its durability and efficiency, this pump provides reliable service in tasks such as pressure washing, industrial cleaning, and other high-flow, high-pressure operations.

One of the standout features of the Giant Triplex Ceramic Plunger Pump is its triplex design. Unlike traditional single-piston pumps, the triplex configuration uses three plungers that work in a staggered sequence. This results in smoother operation, reduced pulsation, and improved overall performance. The synchronized action of the plungers ensures that fluid delivery is constant and consistent, which is crucial for applications requiring high pressure.

The pump is equipped with ceramic plungers, which are engineered to withstand abrasive materials and harsh chemicals. These ceramic components offer exceptional resistance to wear and tear, extending the lifespan of the pump and reducing maintenance costs. This durability is especially beneficial in industrial settings where the pump may encounter contaminants or abrasive substances.

Another technological advancement found in the Giant Triplex Ceramic Plunger Pump is its built-in unloader valve. This crucial component protects the pump from excessive pressure buildup, allowing for safe and efficient operation. In situations where the pressure exceeds pre-set limits, the unloader valve automatically diverts or bypasses the flow, preventing potential damage to the pump and other connected equipment.

Additionally, the Giant Triplex pump features a brass head construction that enhances its strength and robustness. This design also allows for better heat dissipation, ensuring that the pump operates efficiently even under high-pressure conditions. The incorporation of high-quality seals and O-rings enhances the pump's reliability by preventing leaks and ensuring optimal performance over time.

Overall, the Giant Triplex Ceramic Plunger Pump is renowned for its high efficiency, longevity, and robustness. These characteristics make it an ideal choice for various high-pressure applications across industries. Its advanced technologies, including the triplex design, ceramic plungers, built-in unloader valve, and robust construction, provide users with a reliable and effective pumping solution that meets the challenges of modern industrial demands. Whether for pressure washing, cleaning, or other demanding applications, this pump stands out as an essential tool for professionals seeking performance and durability.