Philips WAS6050/12, WAS6050/05 user manual Select language, Set-up with a Center sold separately

5First-time installation

When you connect the Music Station to the power supply, the automatic installation process starts.You must select the language (see ‘Select language’ on page 15) before you can continue.

Select language

1 When you connect the Music Station to the power supply for the first time, wait for the language selection menu to select your language.

2 Press to select, then press .

»After you set the language, the Music Station starts the search for a Center (sold separately).

Tip

•After the first-time language set-up, you can change the language in the Settings menu (see ‘Change language’ on page 999).

Set-up with a Center (sold separately)

You can stream your audio to the Music Station from a Philips Center of the WAC series, such as WAC3500D, WAC7000, or WAC7500.

You can connect the Music Station to the Center in two different modes:

•	Infrastructure
•	Ad-hoc (if you do not have an Internet
1	connection / PC)
	Place the Music Station and the Center
	side by side on a flat and level surface that
2	is strong enough to support the two units.
	Complete the

	• Ad-hoc set-up process: Consult the
	user manual of the Center how to	lish
	add a Station to the Center.
	• Infrastructure set-up process (see	Eng
	‘Infrastructure mode connection to a
3	Center’ on page 15).
	Position the Music Station in a suitable	installation
4	location (within reach of a power socket).
	Position the Music Station where it is
	separated from the Center by no more	time
	than one wall.
		First-
Infrastructure mode connection to a

Center

You can pair the Music Station with a Center in infrastructure mode.

1 Ensure that the Center is

•turned on.

•in standby mode.

2 Ensure that the infrastructure network is wireless-enabled.

3 Ensure that the Music Station is turned on.

4 Press HOME.

5 Press MENU.

6 Select [Settings] > [Network] > [Wireless].

7 Press to start network search.

»The Music Station searches for a network.

»A list of found networks is displayed.

8 Press to select network, then press . 9 Enter encryption key (if necessary).

10 Select [Automatic] > [Apply settings?] > [Yes].

EN 15

was6050_ifu_01en_04de_03es_02fr_15 15

2008-02-14 12:40:35 PM