MUnplug this apparatus during lightning storms or when unused for long periods of time.
NRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
OBattery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit:
•Install all batteries correctly, + and - as marked on the unit.
•Do not mix batteries (old and new or carbon and alkaline, etc.).
•Remove batteries when the unit is not used for a long time.
PApparatus shall not be exposed to dripping or splashing.
QDo not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).
RThis product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org.
Warning
• | Never remove the casing of this Music Station. | ish | |
• Never lubricate any part of this Music Station. | ngl | ||
• | Place this Music Station on a flat, hard and stable | E | |
| |||
| surface. |
| |
• Never place this Music Station on other electrical |
| ||
• | equipment. | Important | |
Only use this Music Station indoors. Keep this Music | |||
| |||
| Station away from water, moisture and |
| |
| objects. |
| |
• Keep this Music Station away from direct sunlight, naked |
| ||
| flames or heat. |
| |
|
|
| |
How to connect a plug
The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L).
As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows:
•Connect the blue wire to the terminal marked N or coloured black.
•Connect the brown wire to the terminal marked L or coloured red.
•Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow).
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.
Mains plug
This apparatus is fitted with an approved 13 Amp plug.To change a fuse in this type of plug proceed as follows:
ARemove fuse cover and fuse.
BFix new fuse which should be a BS13625 Amp,A.S.T.A. or BSI approved type.
CRefit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.
EN
was6050_ifu_01en_04de_03es_02fr_5 5