Philips PD9000/79 user manual Get started, Charge the battery

Page 14

3 Get started

Caution

Use the controls only as stated in this user manual.

Always follow the instructions in this chapter in sequence.

If you contact Philips, you will be asked for the model and serial number of your player.The model number and serial number are on the bottom of your player.Write the numbers here:

Model No. __________________________

Serial No. ___________________________

Charge the battery

Caution

Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the bottom of the player.

Use only the supplied AC adaptor to charge the battery.

Note

The type plate is located on the bottom of the player.

You can only charge the player when it is in power-off mode.

1Slide the POWER ON/OFF (CHR) switch to OFF position.

2Connect the supplied AC adaptor to the player and to the AC outlet.

EN 15

English

Image 14
Contents Register your product and get support at Contents Important Safety Instructions Hearing safety Page Recycling Page Manufactured under license from Dolby Laboratories What’s in the box Your portable DVD playerIntroduction Overview of the main unit Page Overview of the remote control Repeat 1/ALL Charge the battery Get startedInstall remote control battery Connect additional equipment Select OSD language Use your playerTurn on Play discsAdjust settings Play optionsProduct information PAL & NtscTroubleshooting Page Philips Consumer Electronics Warranty Policy for Australia 24 EN