Altec Lansing IMT520 manual Getting Started, Plug the AC adapter into the wall outlet

Getting Started

How to Position the Adjustable Handle

Your Altec Lansing inMotion Kick speaker system is equipped with a unique adjustable handle that doubles as a kick-stand. It provides both an easy way to carry the speaker system as well as a stand to support the speaker system when placed on a flat surface.

	The adjustable handle doubles as a stand.
Prop the speaker system	Rotate the handle to its rearmost position.
on its adjustable handle	Simply grasp and swing the handle backward
	from either the pack position or carry position.
	Rotate the handle to its top position. Simply
Lift the speaker system	grasp and swing the handle backward from the
handle for carry	pack position or forward from the kick-stand
	position.
	Rotate the handle to its down point, tucking it
	snugly under the base of the speaker system.
Pack up the	Simply grasp and swing the handle down from
speaker system	either the kick-stand position or carry position.
	When the handle is in the pack position, the
	speaker system will automatically turn off.

WARNING In order to prevent accidentally dropping your iPhone or iPod, be sure to remove it from the docking station before picking up the speaker system by the handle.

How to Install the AC Adapter

1Connect the AC adapter cable plug into the speaker system’s jack.

The jack is located on the back of the system.

2Plug the AC adapter into the wall outlet.

WARNING Use of another AC adapter may damage the product. Use only the supplied AC adapter.

How to Charge the Lithium-Ion Battery

Your Altec Lansing inMotion Kick speaker system includes a rechargeable lithium-ion

battery. This battery should be fully charged before initial use of the speaker system. A full charge will provide up to 6.5 hours of continuous playing time.

1Connect the speaker system to a wall outlet.

See the How to Install the AC Adapter section. When the speaker system is on, the “Battery” LED will flash slowly to show the battery is charging. Once the battery is fully charged, the “Battery” LED will remain solid.

2Allow the battery to charge.

Charging time: Approximately 4 hours for a full charge. When the battery is low, the “Battery” LED will flash rapidly.

WARNING During the recharging process, it is typical for the battery to become warm. To be safe, keep flammable materials away from the speaker system.

4