Altec Lansing IMT520 Listening to Your iPhone or iPod, Press the button on your iPhone or iPod

1

2

3

4

5

Dock your iPhone or iPod in the Altec Lansing inMotion Kick speaker system.

Select “iPod” mode.

Press the “SOURCE” button on your speaker system or full-featured remote until the “iPod” LED lights up.

Press the button on your iPhone or iPod.

Music from your iPhone or iPod will start playing. The speaker system and its remote are capable of controlling 3rd-generation iPod models, the iPod touch and iPhone.

Adjust the volume.

Use the“+” and “–” buttons on the Altec Lansing speaker system or full-featured remote to adjust the system volume.

Find your desired song.

Press the or button on your speaker system or full-featured remote to go to the next or previous track. Press and hold the or button on your speaker system or full-featured remote while a track is playing for high-speed forward or reverse music search of the current track.

Listening to Your iPhone or iPod

NOTE To conserve battery power, reduce the speaker system volume level.

NOTE During battery-only operation, the speaker system automatically shuts down if no audio is detected for a few minutes. This is to conserve battery power. Press the button to turn the speaker system back on.

NOTE The speaker system is compatible with the alarm clock and sleep timer features built into select iPhone and iPod models. For these features to work properly, the speaker system must be connected to a wall outlet. When an iPhone or iPod is docked, the speaker system will not shut down automatically, enabling the alarm or sleep timer to play through the speaker system. See the user guide for iPhone or iPod for details on how to access these features.

NOTE During AC operation, if there is no iPhone or iPod docked and no audio input signal is detected for a few minutes, the speaker system automatically shuts down to conserve energy. Press the button to turn the speaker system back on.

EN

11