Troubleshooting

Symptom

Possible Problem

Solution

AC adapter isn’t plugged into a wall outlet or the connector isn’t plugged into the power supply jack on the back of the speaker system.

Plug the AC adapter into a wall outlet and plug the connector into the power supply jack on the back of the speaker system.

Speaker system doesn’t

Wall outlet is not functioning.

Plug another device into the same outlet to confirm the outlet is working.

respond (no power)

 

 

 

The rechargeable battery isn’t charged.

Recharge the battery. (See the Getting Started section for details.)

 

 

 

 

The power isn’t turned on.

Turn on the speaker system by pressing the button. The “Power” LED

 

 

lights up.

 

 

 

 

Using the wrong adapter for iPhone or

Make sure the adapter is the proper fit for your iPhone or iPod.

iPhone or iPod doesn’t

iPod, or no adapter.

 

 

 

dock properly

iPhone or iPod didn’t install properly.

Remove your iPhone or iPod from the dock and check for obstruction on the

 

 

 

connectors in the dock and on your iPhone or iPod. Then reseat it in the dock.

 

 

 

14

Page 16
Image 16
Altec Lansing IMT520 manual Troubleshooting, Symptom Possible Problem