Troubleshooting

Symptom

Possible Problem

Solution

 

 

 

 

Volume level is set too high.

Decrease the volume.

 

 

 

Sound is distorted

Sound source is distorted.

If the iPhone or iPod original sound source (MP3) is of poor quality, distortion

 

 

and noise are easily noticed with high-power speakers. Try a different audio

 

 

source such as a music CD.

 

 

 

 

Battery is weak.

Replace current battery with a new battery.

Full-featured remote

 

 

Full-featured remote is not pointed toward

Point the full-featured remote toward the Altec Lansing speaker system and

doesn’t work

 

the speaker system.

move within 10 feet of the unit.

 

 

 

No sound from the AUX

Volume on the device is set too low.

Increase the volume on the device to approximately ¾ full volume.

device, such as an MP3

 

 

Source selector is not set to AUX.

Set source selector to AUX.

player or CD player

connected to the AUX jack

 

 

The speaker system exhibits erratic or unexpected behavior; controls do not function

Static electricity, momentary interruption of power or abnormal operating conditions may be responsible.

1.Disconnect the AC adapter cable plug from the speaker system’s jack.

2.Place the handle in the pack position.

3.Wait 20–30 seconds.

4.Place the handle in the kick-stand position.

Reconnect the AC adapter cable plug to the speaker system’s jack.

Note: See the How to Position the Adjustable Handle section for handle positions.

16

Page 18
Image 18
Altec Lansing IMT520 manual Symptom Possible Problem Solution