Philips PD9000/51 user manual Install remote control battery

»The CHR indicator turns on (red). It takes about 7 hours to fully charge the battery.

»When the battery is fully charged, the CHR indicator turns off.

Install remote control battery

Caution

•Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

•Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

•Batteries contain chemical substances, they should be disposed of properly.

•Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/ hazardouswaste/perchlorate.

For first-time use:

1Remove the protective tab to activate the remote control battery.

To replace the remote control battery:

1Open the battery compartment.

2Insert 1 CR2025 battery with correct polarity (+/-) as indicated.

3Close the battery compartment.

16EN